User's Manual

SDRe Programming Software
Revision V1.0
P a g e | 30
ANT Match: This bar shows you the result of the comparison
between the SWR at calibration time related with actual SWR
status. 100% means the antenna remains working as at the
installation time.
4.2.2.10. Menu
Assign this command to let the user access to the general
repeater menu.
4.2.2.11. Reset
Assign this command to restart the repeater loading a set of new
desired parameters. Current call will be terminated and traffic
report and voice logger will be discarded.
4.2.2.12. Slot Change
Assign this command to change the time slot addressed to the
speaker for TDMA call monitoring.
Pwr. Forward and Antenna matching must be calibrated once the repeater has been installed
by aligning the RF power for the operation frequency, using the proper antenna, duplexer or
combiners. These values are a clear reference but it does not operate as a calibrated
instrument.
Note: 8 – Power and antenna matching calibration
On Once the main menu is accessed, navigation control keys function are overridden getting
the default navigation functions Home, Back, OK and Menu Exit
Note: 9 - Alternative navigation keys function under menu mode alert