User's Manual

SDRe Programming Software
Revision V1.0
P a g e | 29
4.2.2.8. Monitor Momentary
Assign this function when you want to open the audio path
without any signaling or carrier level consideration meantime the
assigned button is held.
This command only operates on analog and hybrid mode.
4.2.2.9. Status
Assign this command to show an instant status report on screen,
displaying the following information:
DC In: is the voltage on repeater DC input.
Temperature: Is the real temperature into the main board, very
close to the RF power module.
PWR Forward: It is a percentage of the power pushed by the
repeater in comparison to the calibrated value on the alignment
procedure. For example, if you align the repeater to transmit 30W
form the alignment software for such desired frequency, and now
the repeater is transmitting only 20W, you will see 66% on this
bar.
It cannot be assigned to an instant action button. Only can be used as long press action
Note: 7 - Monitor Momentary allowed only to long press actions