User's Manual

SDRe Programming Software
Revision V1.0
P a g e | 27
Depending on the application firmware loaded into your radio core,
some functions may not be allowed to be selected or defined.
Depending on the kind of button, some functionalities are not
allowed.
The actions to be assigned to the buttons are:
4.2.2.1. None
Use this option to disable the button.
4.2.2.2. Channel Up
Assign this command to move one-step up on the list of channels.
One Channel up means select the previous channel on the list of
channels defined on the main SDRe programming software
dashboard.
If the current selected channel selected is the top one on the list
of channels, then it will jump to the last channel on the list when
this action is executed.
In case only one channel is programmed on the current memory
bank, this action takes no effect.
4.2.2.3. Channel Down:
Assign this command to move one-step down on the list of
channels. One Channel down means select the next channel on
the list of channels defined for the current list on the main SDRe
programming software dashboard.
If the current selected channel is the last one on the list of
channels, then it will jump to the first channel on the list when
this action is executed.
In case only one channel is programmed on the current memory
bank, this action takes no effect.