User's Manual

SDRe Programming Software
Revision V1.0
P a g e | 19
In case you prefer to program the repeater by Ethernet port, then
TCP/IP port must be checked and the right IP address of the
repeater to be programmed must be indicated into the quick access
bar:
Figure 11: Selecting IP address from the quick access bar
USB or TCP/IP selection may also be done form the bar:
Figure 12: Selecting communication media from the quick access bar
2.2.2. Software Language:
You can choose the language for your software interface.
Figure 13: Software Language Configuration Screen
Select your desired language interface by click on the desired
option.
Software update shall include new languages, so we recommend you try to keep your version
updated.
Note: 4 - Language Update Notice