User's Manual

Page 38
Press OK once the complete message has been written, then the radio
will ask you to type the destination ID for the message. Press [OK] to send
it after the ID has been typed.
After few seconds you will receive the message sent status (sent OK,
failed or delayed)
MENU  ANNOUNCEMENTS
Announce: Allows the user to the enable or disable the radio announces.
Navigate, using [UP] and [DOWN] arrow keys, through the list of
announcement to be activated or deactivated , then press [OK] to access
to the programming mode. Use [UP] and [DOWN] arrow keys to switch
the announcement feature ON or OFF then press [OK] to confirm the
selection.
Announce  Bank: announce the current bank number. Played back
each time you change the current bank.
Announce  Squelch: Announces the current squelch mode. Played
back each time you change the squelch mode.
Announce  Battery: Announces the actual battery status, including the
remaining charge in percentage and the time to finish the charge as per
Anounce
Bank
Squelch Mode
Squelch Level
Battery
GPS
Power
RSSI
IDs
Channel