RC77 Ceramic Hob User Guide & Installation & Service Instructions U109916 - 02
Contents 1. Before You Start... 1 2. Ceramic Hob Overview 3 3. Cleaning Your Hob 8 4. Troubleshooting 9 5. Installation 10 6. Circuit Diagram 13 7. Technical Data 14 8.
DocNo.012-0001 - Introduction - BI hob ceramic 1. Before You Start... Thank you for buying a Rangemaster hob. It should give you many years trouble-free cooking if installed and operated correctly. It is important that you read this section before you start, particularly if you have not used a ceramic hob before. This appliance is designed for domestic cooking only. Using it for any other purpose could invalidate any warranty or liability claim.
Hob Care Cleaning Never cook directly on the hob surface. The ceramic surface should be washed after use in order to prevent it from becoming scratched or dirty. Do not use the hob surface as a cutting board. In the interests of hygiene and safety, the hob should be kept clean at all times as a build up in fats and other foodstuffs could result in a fire. Do not leave utensils, foodstuffs or combustible items on the hob when it is not is use (e.g. tea towels, frying pans containing oil).
2. Hob Overview DocNo.022-0002 - Overview - RC77 ceramic Fig.2-1 ���������������������������� ����������������������������������������� �������������������������������������� �������������������������� Art No. 315-0007 RC77 hob �������������������������� ��������������������� ��������������������������������������� ��������������������������������������� ����������������������������� The ceramic hob comprises of four cooking zones containing heating elements with different ratings and diameters (Fig.
Fig.2-5 � � � � �� � �� �� �� Art No. 315-0006 RC77 ceramic controls � 1. Power ON/Power OFF 2. Cooking zone 3. Zone digital displays (4 off) including zone selector light � � � 4. Dual element indicator lights (2 off) 5. Dual element selector key 6. ‘+’ key � 7. ‘–’ key 8. Timer key 9. Timer digital display 10. Timer indicator lights (4 off) � 11. Key lock 12. Key lock indicator light Using a lid will help the contents boil more quickly. Fig.
Note: The ‘+’ keys have a repeat function: holding the key pressed down will increase the power setting by one level every 0.3 seconds. Fig.2-8 To reduce the power to a cooking zone select the required zone, as indicated by the red dot in the display. Press the ‘–‘ key to reduce the power required. Note: The ‘–’ key has a repeat function: holding the key pressed down will reduce the power setting by one level every 0.3 seconds. Art No.
To adjust the preheat power level: Select the cooking zone (make sure the dot is illuminated) and then press the ‘+’ key to increase the power level. Pressing the ‘–‘ key after the preheat is underway will interrupt the operation, switching off the preheat and leaving the cooking zone operating at one power level lower. Fig.2-11 Art No. 315-0012 RC77 Timer on Timer Function The timer has two settings: Zone timer Minute timer Fig.
Turning off the timer alarm: At the end of the cooking time the hob will beep steadily for 2 minutes. Press any key to stop the alarm. Deactivating the timer: Make sure that none of the cooking zones has been selected. Press the timer and ‘–‘ keys simultaneously. The timer display will return to ‘00’. Child Lock Function This allows the control panel to be locked to prevent any accidental use.
3. Cleaning Your Hob DocNo.041-0002 - Cleaning gas 5-element Essential information Fig.3-1 Allow the cooker to cool and then isolate the electricity supply before carrying out any thorough cleaning. � � � All parts of the hob can be cleaned with hot soapy water – but take care that no surplus water seeps into the appliance. � � � Remember to switch on the electricity supply before re-using the cooker. ArtNo.
Cleaning Table ���� Refer to the cleaning tables (Table 3-1 and Table 3-2) for details on cleaning the hob. The cleaners listed are available from supermarkets or electrical retailers. For enamelled surfaces use a cleaner that is approved fro use on vitreous enamel. The Vitreous Enamel Association has a list of approved suppliers. Contact them via their website www.ive.org.uk or telephone: 01527 893031.
4. Troubleshooting DocNo.052-0001 - Troubleshooting ceramic & induction If there is an installation problem and I don’t get my original installer to come back to fix it, who pays? You do. Service organisations will charge for their callouts if they are correcting work carried out by your original installer. Therefore, it’s in your own interest to keep track of this installer so that you can contact them as required. A crack has appeared in the hob surface.
INSTALLATION Check the appliance is electrically safe you have finished. 7. Installation DocNo.062-0002 - Installation - RC77 ceramic Dear Installer Location of the Hob Before you start your installation, please complete the details BELOW. The hob may be installed in a kitchen/kitchen diner but NOT in a room containing a bath or shower. Should your customer have a problem relating to your installation they will be able to contact you easily. This appliance is designed for domestic cooking only.
INSTALLATION Check the appliance is electrically safe when you have finished. Positioning the Hob Fig.5-1 The hob should be fitted into a work surface, which is at least 600mm deep. In position, the hob has a maximum thickness of 5mm from the top of the work surface, and an overall thickness of 45mm (65mm max depth including the connection block). The cut-out dimensions are shown in (Fig.5-1), and the minimum clearances in (Fig.5-2).
INSTALLATION Check the appliance is electrically safe you have finished. Electrical Connections Fig.5-4 This appliance must be installed by a qualified electrician to comply with the relevant Institute of Electrical Engineers (I.E.E.) regulations and also the local electricity supply company requirements. ��� ������� ����� WARNING: THIS APPLIANCE MUST BE EARTHED Note: All external wiring must comply with the IEE Regulations for the Electrical Equipment of Buildings.
DocNo.092-0002 - Circuit diagram - RC77 6. Circuit Diagram L L � N � � L N � L � � �� ���������� N � � �� �� N � � � � ��� � � � ArtNo.080-0012 RC77 circuit diagram � � ��� � � �� � � ��� �� � � �� � �� �� � �� ��� � �� � � � �� � � � � � � �� �� ��� � � � �� � �� � � �� ��� �� �� � N � �� �� �� � �� �� �� L ����������� � � � � 14 �� ���� ��� ����� ��� ����� ��� ������ �� ��� �� ������ ArtNo.
7. Technical Data DocNo.102-0002 - Technical data - RC77 INSTALLER: Please leave these instructions with the user.
8. Warranty/After Sales Service If consultation or technical assistance is needed, please provide the local authorised service agent with the purchase invoice and the product code/serial number. The 2 years free maintenance for the operation of the appliance started from the date of purchase of this product. Any cosmetic damage to the appliance must be reported within 90 days of delivery. For in-warranty service please call: 0845 6035312. For general enquiries please call: 0870 7895107. 16 DocNo.
17
DocNo.000-0001 - Back cover Rangemaster ���������������������������������������� ArtNo.000-0003 CE logo www.rangemaster.co.
