User guide
INSTALLATION
Check the appliance is electrically safe and gas sound when you have nished.
28
ArtNo.281-0026 - Front plinth
Fig.7-15
Fig.7-17
Final Fitting
Fitting the Plinth
Remove the 3 screws for the plinth mounts along the front
bottom edge of the range (Fig.7-15). Fasten the plinth using
these screws (alternative colour screws can be found in the
loose parts pack).
Refitting the Drawer
To ret the drawer in the cooker, pull the side rails fully out
(Fig.7-16). Make sure the inner race is forwards.
Carefully move the drawer back between the rails and rest it
on the side rails (Fig.7-17).
Push the drawer back until the clips click into place.
Refitting the Oven Door
To ret the door, slide the hinges back into their slots. Rotate
the locking ‘U’ clips back to t onto the hinges.
Customer Care
Installer: Please complete your details in this guide, inform
the user how to operate the cooker and hand over the
instructions.
Thank you.
Make sure the inner
rail is forwards
Fig.7-16