STAINLESS STEEL INSET SINKS WITH FIXED POSITION CLIPS Installation Instructions & Aftercare Information Instructions for Manhatton, Keyhole, Chicago, Oakland, Glendale, Baltimore & Arlington
INSTALLATION Installer Fig.1 Please leave this leaflet with the user, as it contains valuable after care advice. Notes Please take care of sharp metal edges before and nn during installation. During installation, take care to protect the sink nn from scuffs and scratches. Avoid straining and overtightening of all plumbing nn fixtures connected to the sink. Fig.2 Carefully check that the moulding and edges of the nn sink are dead level so that water will flow off the Worktop drainer.
Fitting the Arlington Overflow Pipework Fig.5 The overflow pipework for the Arlington sink will require modifying to fit. Cut the parts as shown (Fig.5). Fit together as normal. To ensure a watertight seal, apply silicon sealant onto the sink-side face of the rubber seal before fitting it to the sink (Fig.6). 10 mm 55 mm 30 mm Rubber seal Fig.
AFTER CARE Day-to-day Care Routine cleaning of your stainless steel sink is easy if the following simple procedure is followed: After use wipe the bowl and drainer with a soft damp soapy cloth and rinse with clean water. In hard water areas, an application of proprietary cream cleaner or stainless steel sink cleaner will avoid any build-up of a dull film of waterborne deposits.
