User guide

INSTALLATION

Check the appliance is electrically safe and gas sound when you have nished.

Checking the Parts:You will need the following equipment to complete the

cooker installation satisfactorily:

• Stability bracket: If the cooker is to be supplied with

gas through a flexible hose, a stability bracket or chain

MUST be fitted.

These are not supplied with the cooker but are

available at most builders’ merchants.

• Gas pressure tester/manometer.

• Flexible gas hose: Must be in accordance with the

relevant standards.

• Multimeter: For electrical checks.

You will also need the following tools:

Electric drill

2. Masonry drill bit (only required if tting the cooker on a

stone or concrete oor)

3. Wall plugs (only required if tting the cooker on a stone

or concrete oor)

4. Steel tape measure

5. Cross head screwdriver

6. Flat head screwdriver

7. Spirit level

8. Pencil

9. Adjustable spanner

10. Screws for tting stability bracket

11. 4 mm & 3 mm Allen keys

12. 13 mm spanner or socket wrench

3 pan supports Griddle plate (some models)

ArtNo.000-0001 90 Pan supports

Plinth Grill pan & trivet

ArtNo.350-0005 - 90 plinth

ArtNo.330-0002 - Grill pan w handle

Flat shelves 1 drop shelf (some models)

Handyrack Roasting tin

ArtNo.324-0003 Handyrack

ArtNo.324-0004 Roasting tin

Tall oven shelves and shelf

supports

Splashback (Classic only)

ArtNo.000-0010 Tall oven shelves

ArtNo.350-0012 - splashback