Specifications

R
(FM10) SEMCON LAND ROVER OWNER GUIDE VER 2.00 EURO
LANGUAGE: english-en; MARQUE: landrover; MODEL: Range
Rover Evoque
Heating and ventilation
73
TIMED CLIMATE CONTROL
The timed climate control system provides a
comfortable temperature inside the cabin in
advance of driver and passengers entering.
Dependent on the external temperature, the
system draws in fresh air to cool the cabin or
operates the auxiliary heater to warm it.
The Auxiliary heater is also operated to warm
the engine and aid starting in very cold
conditions.
The timed climate control system may be
operated by either the Touch screen or the
remote handset.
The system may not operate or will switch off
automatically in the following scenarios:
 If the fuel level is low.
 If the vehicle’s battery charge is low.
 If the coolant temperature is at or above its
required temperature.
SETTING A TIME FOR TIMED
CLIMATE OPERATION
The Touch screen can be used to either preset
activation times or to operate the system
manually.
When the system is operating, the LED in the
climate control AUTO button will flash.
Note: The system will cease operation if the
engine is started
To set a timed climate programme:
1. Press the HOME MENU hard key.
2. Touch the Timed Climate soft key. This
soft key may be set on a personal shortcut
or accessed via the Extra Features soft
key. Select the day for which you want to
set a programme or select All Week to
select the same start time for every day.
3. Touch the Timer 1 or Timer 2 icon. The
timers can be toggled between on and off
using the power soft key.
4. Touch the up or down arrows to set the
start time. Hours and minutes are adjusted
separately.
5. Touch OK. The screen will display the
activation time. If required, set the time for
the other timer using the same process.
Note: The time format, 12/24 hour clock, is
determined by the time settings currently
selected in the System settings menu. See 40,
INSTRUMENT PANEL MENU.
A current heating cycle will be cancelled if the
engine is started. Any programmed heating
cycle may be cancelled by touching the
relevant power soft key on the timer set up
menu or the Power soft key on the Timed
Climate information home menu.
USING THE TIMED CLIMATE REMOTE
1. ON button.