Specifications

L
(FM10) SEMCON LAND ROVER OWNER GUIDE VER 2.00 EURO
LANGUAGE: english-en; MARQUE: landrover; MODEL: Range
Rover Evoque
Exterior lights
48
Exterior lights
LIGHTING CONTROL
1. With the headlamps on, push the control
away from the steering wheel to select high
beam. The Instrument panel warning lamp
will illuminate. See 47, HIGH BEAM
(BLUE).
Note: Do not use high beam where it may
distract other road users.
2. Pull the control towards the steering wheel
and release to flash the high beam on and
off. The high beam will remain on for as
long as the switch is held.
3. Side lamps: Rotate the control to this
position to switch the side lamps on. The
Instrument panel warning lamp will
illuminate. See 46, SIDE LAMPS (GREEN).
4. Headlamps: Rotate the control to this
position to switch the headlamps on.
5. AUTO: With Auto lamps selected, when the
ambient light fades and the ignition is on,
the side lamps, tail lamps, dipped beam
headlamps and licence plate lamps will
switch on automatically. Headlamp
courtesy delay, High beam assist and the
Windscreen wipers detection may also be
activated.
Note: Low exterior light levels, caused by
adverse weather conditions, may also
cause the Auto lamps to activate.
6. Rear fog lamps: Will operate only while
side lamps, headlamps or Auto lamps are
selected. Turn the collar towards the
steering wheel and release. The Instrument
panel warning lamp will illuminate. See 45,
REAR FOG LAMP (AMBER).
7. Front fog lamps: Will operate only while
side lamps, headlamps or Auto lamps are
selected. Turn the collar away from the
steering wheel and release. The Instrument
panel warning lamp will illuminate. See 46,
FRONT FOG LAMPS (GREEN).
In the event of a bulb failure, it should be noted
that some bulbs are renewable only by a
Dealer/Authorised Repairer. See 197,
CHANGING A BULB.
DAYTIME RUNNING LAMPS
The Daytime running lamps are LED lamps.