Specifications

L
(FM10) SEMCON LAND ROVER OWNER GUIDE VER 2.00 EURO
LANGUAGE: english-en; MARQUE: landrover; MODEL: Range
Rover Evoque
Instrument panel
42
A short press (1 second or less) or a series of
short presses of the ¡ button will change the
trip computer display. The options available
are:
 Date and Odometer.
 Trip distance.
 Trip average speed.
 Trip average fuel consumption.
 Instantaneous (short term average) fuel
consumption.
 Range available from remaining fuel.
 Blank display.
 ECO data system status display.
Note: These options can be enabled/disabled
via the Trip Computer and Trip content
Instrument panel menus, except for the ECO
data system status display and the Date and
Odometer options.
To reset the trip computer values to zero, press
and hold the ¡ button for 2 seconds.
To reset the fuel consumption value, press and
hold the button until the display clears.
The distance, average speed and average fuel
economy values for trip A and trip B can be
reset. Set the trip computer display to show the
trip that you wish to reset, then press and hold
the ¡ button until the message Resetting trip is
displayed.
It is not possible to manually reset the Auto trip
memory. This resets automatically each time
the ignition is switched on.
Trips may be added together, to record a
continuous journey, or removed. Press the
button for longer than 1 second, when Auto trip
memory values for distance, average speed
and average fuel economy are displayed, then
Adding last journey or Removing last journey
will appear on the screen. Press the button for
longer than 1 second, and the previous trip
information will be added to or removed from
the current trip and the new total will be
displayed. There is no limit to the number of
times this can be done before the ignition is
switched off.
TRIP DISTANCE
Distance travelled since the last memory reset.
The maximum trip reading is 9999.9
(kilometres or miles). The computer will
automatically reset to zero if this distance is
exceeded.
RANGE
This shows the predicted distance (kilometres
or miles) that the vehicle should travel on the
remaining fuel, assuming fuel consumption
and driving style remain constant.
METRIC/IMPERIAL/MIXED DISPLAY
The trip computer readings can be changed
between metric, imperial and mixed units in the
Trip Computer menu of the Message centre.
See 40, INSTRUMENT PANEL MENU.
Note: Temperature display can be changed
between °C (Celsius) and °F (Fahrenheit)
independently of Metric or Imperial units.