Specifications

(FM10) SEMCON LAND ROVER OWNER GUIDE VER 2.00 EURO

LANGUAGE: english-en; MARQUE: landrover; MODEL: Range

Rover Evoque

Child safety

INSTALLING ISOFIX CHILD

RESTRAINTS

To install an ISOFIX child seat:-

1. Locate the ISOFIX locking mechanism.

2. Slide the child seat into the locking

mechanism.

3. If an upper tether is fitted to the child seat,

make sure it is properly secured to the

upper tether anchorages on the rear of the

seats.

Test the security of the child restraint. To do

this, attempt to pull the restraint away from the

vehicle seat and twist the restraint from side to

side. Even if the restraint appears secure, you

should still check the anchor points visually, to

make sure they are correctly attached.

Note: Always make sure that if an upper tether

is provided, it is fitted and tightened correctly.

TETHER ANCHORAGE POINTS

child restraint anchorages are

designed to withstand only those

loads imposed by correctly fitted child

restraints. Under no circumstances

are they to be used for adult seat

belts, harnesses or for attaching other

items or equipment to the vehicle.

Always follow the child seat or

restraint system manufacturer’s

instructions when fitting tether straps.

When fitting a child seat or restraint

system, always pass the tether strap

over the top of the seatback and

beneath the head restraint.

If a child seat or restraint system is to

be fitted to the centre seating

position, the centre armrest must be

in the stowed position (folded into the

seat).