Specifications

L
(FM10) SEMCON LAND ROVER OWNER GUIDE VER 2.00 EURO
LANGUAGE: english-en; MARQUE: landrover; MODEL: Range
Rover Evoque
Seat belts
26
Seat belts
USING THE SEAT BELTS
1. Putting on a seat belt: Draw the belt out
smoothly, make sure the belt height, the
seat and your position on the seat, are
correct.
Seatbelts are designed to bear
upon the bony structure of the
body, and should be worn low
across the front of the pelvis or the
pelvis, chest and shoulders, as
applicable; wearing the lap
section of the belt across the
abdominal area must be avoided.
No modifications or additions
should be made by the user which
will either prevent the seat belt
adjusting devices from operating
to remove slack, or prevent the
seat belt assembly from being
adjusted to remove slack.
Seatbelts should be adjusted as
firmly as possible, consistent with
comfort, to provide the protection
for which they have been
designed. A slack belt will greatly
reduce the protection afforded to
the wearer.
Belts should not be worn with
straps twisted.
Each belt assembly must only be
used by one occupant; it is
dangerous to put a belt around a
child being carried on the
occupant’s lap.
The occupants of the front seats
should not travel with the
seatback at more than 30 degrees
from the upright position. Doing
so will reduce the protection
afforded by the seat belt.
Never place anything between you
and the seat belt. It can be
dangerous and reduce the
effectiveness of the seat belt in
preventing injury.
2. Fastening a seat belt: With the seat belt
correctly positioned, place the metal
tongue into the buckle nearest to you.
Press it in until a click is heard.