Specifications

L
(FM10) SEMCON LAND ROVER OWNER GUIDE VER 2.00 EURO
LANGUAGE: english-en; MARQUE: landrover; MODEL: Range
Rover Evoque
Tyre repair kit
242
8. To check the tyre pressure, turn off the
compressor and then read the pressure
from the gauge.
9. When the compressor is off, if the tyre
pressure is too high, release the required
amount of pressure using the pressure
release valve.
10. Once the tyre is inflated to the correct
pressure, switch off the compressor and
remove the power plug from the auxiliary
socket.
 The use of the tyre repair kit sealant
may lead to error prompts and
incorrect readings of the Tyre Pressure
Monitoring System (TPMS).
Therefore, use the tyre repair kit
pressure gauge to check and adjust the
damaged tyre's inflation pressure.
11. Unscrew the inflation hose connector from
the tyre valve, renew the tyre valve cap and
the inflation hose connector protective cap.
12. Make sure that the tyre repair kit is placed
securely in the vehicle.
13. Drive to the nearest tyre repair centre or
Dealer/Authorised Repairer, for a
replacement tyre to be fitted. Make sure
that you make the repair centre aware that
the tyre repair kit has been used before the
tyre is removed.
14. The tyre inflation hose, the receiver and the
sealant bottle must be renewed once a new
tyre has been fitted.
Only sealant bottles which are
completely empty should be
disposed of with normal
household waste. Sealant bottles
which contain some sealant, and
the tyre inflation hose, should be
disposed of by a tyre specialist or
your Dealer/Authorised Repairer
in compliance with local waste
disposal regulations.