Specifications

L
(FM10) SEMCON LAND ROVER OWNER GUIDE VER 2.00 EURO
LANGUAGE: english-en; MARQUE: landrover; MODEL: Range
Rover Evoque
Maintenance
202
Removing the right side bulb:
To gain more room for accessibility, follow the
process for moving the right side headlamp
unit.
At the back of the headlamp unit, remove the
indicator bulb housing, turn it counter
clockwise to release.
REAR DIRECTION INDICATOR AND
REVERSING LAMP BULB
REPLACEMENT
1. Remove the 2 fixings.
2. Direction indicator:
 To remove the bulb holder, press in the
outer wings on the black plastic unit
and pull the holder free of the housing.
 Push in the release mechanism while
pulling the connector and bulb holder
apart.
 Refitting is a reverse of the removal
process. Make sure the connector lock
is pressed down and that the bulb unit
locates securely into the fog lamp
housing.
Note: Inside the bulb holder are three
locating lugs. When fitting the new bulb
unit, the lugs must align correctly to the
connector.
3. Reversing lamp:
Turn the bulb holder counter clockwise and
pull to remove it from the lamp unit. Grip
the holder then press the bulb into the
holder and turn counter clockwise to
release the bulb. Pull the bulb up to
remove.
REAR FOG LAMP BULB
REPLACEMENT
Always find a safe place to stop, off
the highway and away from traffic.
Apply the parking brake. Engage Park
(P) on automatic vehicles, select 1st
or reverse gear on manual vehicles.
Switch on the hazard warning lamps.
Place a warning triangle at a suitable
distance behind the vehicle, facing
towards oncoming traffic.
Disconnect trailer/caravan from
vehicle.
Make sure all passengers, and
animals, are out of the vehicle and in
a safe place away from the highway.