Specifications

L
(FM10) SEMCON LAND ROVER OWNER GUIDE VER 2.00 EURO
LANGUAGE: english-en; MARQUE: landrover; MODEL: Range
Rover Evoque
Front seats
20
1. On the driver’s door, press the memory
store button to activate the memory
function. The switch indicator will
illuminate.
2. Press one of the preset buttons within 5
seconds to memorise the current settings.
Memory (1, 2 or 3) Settings Saved will be
displayed on the Message centre,
accompanied by an audible chime to
confirm the settings have been saved to
memory.
Note: A seat position will be saved to
memory only during the 5 second active
period.
Note: Any existing settings will be
over-written when a new position is saved
to memory.
To recall a saved position, press the
relevant preset button (2). Memory (1, 2 or
3) Recalled will be displayed in the
Message centre.
Coupe passenger seat
Saving a seat position to memory follows
the same procedure as for the driver’s seat.
Press the memory button to store the
current seat settings.
EASY ENTRY/EXIT
When Easy entry/exit is enabled, the driver’s
seat will automatically lower when the ignition
is switched off and the door is opened. Upon
returning to the vehicle, when the driver’s door
is closed and the ignition is turned on, the seat
will return to its previously set position.
This feature can be enabled/disabled via the
Instrument panel menu. See 40, INSTRUMENT
PANEL MENU.
REAR SEAT ACCESS
The front seats tilt and power slide forwards for
entry to and exit from the rear seats.
Take care not to damage the seatbacks
while gaining access to the rear seats.
Standard seats
1. Lift the locking lever and pivot the seatback
forwards.
2. Push the switch forwards or use the side
mounted switch (3) to power slide the seat
forwards.