Specifications
L
(FM10) SEMCON LAND ROVER OWNER GUIDE VER 2.00 EURO
LANGUAGE: english-en; MARQUE: landrover; MODEL: Range
Rover Evoque
Standard audio system
180
To store a service on a preset: While playing
the desired service, press and hold the desired
preset button. A bar-graph will show,
indicating how long you need to hold the
button, followed by a 'Preset Stored' pop-up
message. Now release the button.
DAB SERVICE LIST
A quick way to see all the services available on
the presets and all the other services which
may be received in the current ensemble is to
use the navigation control (3)togotothe
waveband list, select either DAB1 or DAB2,
then the right navigation button to list the
presets of DAB1 or DAB2. If the desired station
is not listed, there is a Service List option at the
top of the list. Scroll up to the Service List item
and press the right navigation button to see all
the services of the current ensemble listed. Use
the navigation control up/down buttons to
scroll up and down the list. If you want to select
a service, scroll the outline box onto the
desired service and press OK.
DAB MANUAL TUNING
Press and hold the seek-up or seek-down
buttons for approximately 3 seconds to enter
Manual Tuning. The Manual Tuning pop-up
will appear on the display. Using the seek-up or
seek-down buttons you can then move through
all the services and ensembles in turn.
If an ensemble is empty or not receivable then
the tuning will move along to the next. If an
ensemble is only just strong enough to receive
but the services are too weak to use, the tuning
may stop on that ensemble and display the
ensemble's name, and possibly the service's
name, but without sound. If no sound is heard
within 5 to 10 seconds then press the
appropriate seek button again to move onto the
next useable ensemble.
To select and play a service of your choice,
locate it and make sure the audio is receivable,
then press OK.
The Manual Tuning mode allows up to 30
seconds of inactivity before it times out. If
Manual Tuning times out with no new service
tuned, the radio will revert to the service you
were tuned to at the start of your Manual
Tuning session.
SERVICELINK
ServiceLink is an item on the Menu (2) and can
be enabled or disabled using the OK button.
When ServiceLink is enabled, 2 additional
features come in to operation:
If you are listening to a local service which
has a partner service in an adjacent area,
when the signal weakens it will
automatically change over to the new
area's partner service.
If you have selected a digital service which
has an equivalent FM service in the area
and your digital service has deteriorated,
then the radio will automatically switch to
the alternative FM service until the digital
reception becomes adequate again.
We advise that ServiceLink is switched off
when searching for ensembles or using Manual
Tuning.
DAB DISPLAYED MESSAGES
'Searching....' is displayed when the radio is
tuning itself to the correct ensemble. You will
see this for a few seconds during some preset
changes, and when seeking up or down to
another ensemble.