Specifications

R
(FM10) SEMCON LAND ROVER OWNER GUIDE VER 2.00 EURO
LANGUAGE: english-en; MARQUE: landrover; MODEL: Range
Rover Evoque
Standard audio system overview
175
15. Seek down:
 Short press to select the previous radio
station downward in frequency or to
select the previous track on chosen
audio source.
 Long press to enter radio manual seek
mode or to scan backward through a
CD track. In radio manual seek mode
further short presses will change the
frequency in single steps.
16. MODE: Press repeatedly to scroll through
all audio.
17. Press to increase volume.
18. Press to decrease volume.
19. Seek down:
 Short press to select the previous radio
preset or previous track on chosen
audio source.
 Long press to scan backward through
a track.
20. Seek up:
 Short press to select the next radio
preset or the next track on chosen
audio source.
 Long press to scan forward through a
track.
ADAPTIVE VOLUME CONTROL (AVC)
The AVC feature adjusts the volume level to
compensate for the changes in road noise as
the vehicle speed increases or decreases.
Note: The AVC setting represents the volume
increase and not the volume level.
If the AVC level is set to zero, there will be no
volume increase. With a low level setting, the
volume increase at speed will be minimal. If a
high level setting is used, there will be a
noticeable increase of volume at greater speed.
To set the AVC level:
1. Press the MENU (2) button.
2. Select Audio Settings.
3. Select Adaptive Volume then press OK.
4. Use the navigation controls to set the
required level of AVC effect in the range 0
to 7.
TONE ADJUSTMENT
To adjust the tone:
1. Press the MENU (2) button.
2. Select Audio Settings.
3. Select Sound. Settings for bass, treble,
balance and fade can be adjusted with the
navigation controls.
4. Press OK to store the settings and return to
the previous screen.
Note: If no adjustment is made for several
seconds, the display will revert to the
previously displayed screen.
LICENSING
See 127, LICENSING.