Specifications

L
(FM10) SEMCON LAND ROVER OWNER GUIDE VER 2.00 EURO
LANGUAGE: english-en; MARQUE: landrover; MODEL: Range
Rover Evoque
Navigation system
170
LOAD ROUTE
Load route allows a previously stored off-road
route to be recalled. Touching the Load Route
soft key will bring up a list of stored routes;
touch the desired route to select. When loading
a route, the current vehicle location is stored as
the starting point, shown as the letter S on the
map screen.
ROUTE OPTIONS
Allows access to the following commands:
Edit Route
These menu items are identical in operation to
the on-road menus.
A maximum of 20 off-road routes can be
stored. When the maximum is reached, the
New Route soft key will no longer be active.
Stop Guidance
Allows a selected route to be cancelled. Touch
the soft key to cancel guidance. All waypoints
and icons will be removed.
Display route
The whole route can be displayed during
guidance mode. It shows the total mileage of
the route and updates as the vehicle's position
changes.
CCP to Start (Current Car Position to Start)
A backward or return route can be made at any
time. All waypoint icons of the original route
are reset and the system draws straight lines
between them.
The original start point is now designated as
the destination point and waypoints are
numbered in countdown order.
CCP to Destination (Current Car Position to
Destination)
Restores the original route to destination after
CCP to Start is selected.
Waypoint list
Off-road navigation waypoints are shown in
numerical order. The nearest waypoint is the
last in the list. A maximum of 35 waypoints can
be stored.
During a forward route, the waypoint with the
smaller number is nearest on the guidance
display. During a backward or return route the
smaller number is furthest away.
The bearing (e.g., R170) and distance (e.g., 1
mile) is a reference to the next waypoint. The
bearing is the angle between the current
heading and the next waypoint. The displayed
information is continuously updated.
While the list is shown, if the destination is
reached, the system changes to the map
screen.
Skip Waypoint
While on a route, this soft key can be selected
to skip the next waypoint. Guidance will then be
given to the following waypoint.
Trace Points
If Current Trace Point is selected via Route
Options, trace point icons are automatically
placed along a route as it is traversed. They are
useful to backtrack along the route, if required.
Adjustments to trace point operation can be
made via the same screen. After selecting the
Edit Trace Point option, changes can be made
to any registered trace point route.
Select one of the options and make changes as
required (e.g., trace points can be edited,
renamed or deleted).