Specifications

R
(FM10) SEMCON LAND ROVER OWNER GUIDE VER 2.00 EURO
LANGUAGE: english-en; MARQUE: landrover; MODEL: Range
Rover Evoque
Navigation system
163
5. Select Ok. The destination entry menu is
shown and the information window shows
the currently selected search area.
SETTING A DESTINATION
To set a destination proceed as follows:
1. After touching Continue, the initial map
screen is displayed, now touch Nav menu.
2. From the Nav menu, touch Destination
entry.
Note: Destination entry button is also
available in Home menu as well as in the
main map view.
3. Touch Address from the Destination
screen and input the town name or
postcode (short postcode in the UK).
4. Once sufficient letters have been entered,
touch Ok or List to display all the possible
towns.
5. If necessary, use the scroll arrows to the
left of the list to search up or down. Select
the town that you require.
6. Now enter the road name. Once sufficient
letters have been entered, touch Ok or List
to display all the possible roads.
7. Select the road you require. Enter the
house number of the address (if known)
and then touch Ok to confirm.
8. If the house number is not known, select
Ok, the end of the road is then used as the
destination.
9. The map screen showing the selected
destination details is displayed. Touch GO
to calculate the default quick route, or
Review route for alternative routes.
10. Touch GO to start the journey.
START GUIDANCE
After selecting Review route, the system will
calculate the route.
1. Touch 3 Routes to display a choice of 3
different route options on the map. The
roads on the map are drawn in 3 different
colours to highlight each route. EcoRoute
helps you find the most fuel-efficient route
available. A display of 3 leaves indicates
the most fuel-efficient route.
2. Select route Quick, Short or Alt route by
touching the respective box displayed on
the right side of the map.
3. Touch Change Route followed by Route
preferences to change the route settings.
4. When you have made your selection, if any,
touch GO.
Note: As you approach a junction, in addition
to the voice guidance, an inset on the map will
display an enlarged view of the junction.
AVOID POINTS
When calculating a route, an area to avoid can
be set and stored.
1. From the Nav menu, touch More....
2. Select Stored locations.
3. Select Avoid points.
4. Select Add.
5. Select the location of the area to avoid from
the Destination entry menu. Touch Ok to
activate the view where the size of the area
to avoid can be set. The size of the area can
be adjusted by using the '+' and '-'
symbols.
6. Touch Ok to activate the area to avoid.
7. Touch Ok, the area to avoid is now set and
stored.