Specifications
R
(FM10) SEMCON LAND ROVER OWNER GUIDE VER 2.00 EURO
LANGUAGE: english-en; MARQUE: landrover; MODEL: Range
Rover Evoque
Navigation system
159
Navigation system
THE NAVIGATION SYSTEM
Navigation instruction is by map and turn
information displayed on the Touch screen and
can be complemented by voice guidance, if
required. The system uses signals from Global
Positioning System (GPS) satellites combined
with information from vehicle sensors and
from data stored on the hard drive, to establish
the true position of the vehicle.
Note: Mapping data loaded on the hard drive is
relevant to the market in which the vehicle is
first sold and will provide guidance and
information only for that area. Your
Dealer/Authorised Repairer will have details of
software updates.
Using this combination of data sources, the
vehicle's navigation computer enables you to
plan and follow a route map to your desired
destination.
The Touch screen is used to control navigation
via menus, text screens and map displays.
Operate the system only when it is
safe to do so.
Note: The Navigation system fitted to your
vehicle does not support speed camera alerts.
The requirements of national Road Traffic
Regulations always apply.
Observation of traffic signs and local traffic
regulations always take priority.
The Navigation system serves solely as an aid
to navigation. In particular, the Navigation
system cannot be used as an aid to orientation
when visibility is poor.
GPS signals may occasionally be interrupted
due to physical barriers, such as tunnels and
roads, under raised highways.
However, direction and speed sensors on the
vehicle will minimise any adverse effect on the
Navigation system. Normal operation will
resume once the obstruction has been passed.
Under certain conditions, it is possible for the
vehicle's position shown on screen to be
incorrect. This may happen when:
Driving on a spiral ramp in a building.
Driving on or beneath elevated roads.
2 roads are close and parallel.
The vehicle is transported to another
destination.
After the vehicle is rotated on a turntable.
After vehicle battery disconnection.
USING THE NAVIGATION SYSTEM
1. NAV shortcut button: Press for navigation.
2. Navigation soft key: Touch for navigation.
3. Destination entry: Touch to display the
destination entry menu.
Note: On vehicles with off-road navigation, the
soft key includes On road NAV or Off road NAV,
to show the current Navigation mode.
After touching Continue, the Touch screen will
display the previously displayed map view.
This will show the current vehicle position.
Touch the Nav menu soft key to display the
Main menu screen.