Specifications

L
(FM10) SEMCON LAND ROVER OWNER GUIDE VER 2.00 EURO
LANGUAGE: english-en; MARQUE: landrover; MODEL: Range
Rover Evoque
Telephone
156
On some phones, this is referred to as new
paired device. See your phone's operating
instructions for further information.
6. When the vehicle's Bluetooth wireless
technology system is discovered, follow
the on-screen instructions. Select Yes
when prompted, to confirm the pairing.
Either the phone or the vehicle's system
will ask for a PIN (Personal Identification
Number). When prompted, enter a PIN of
your choice and select OK to confirm.
7. Enter the same PIN into the other device.
8. Once your phone is paired and connected
to the system, a confirmation message will
be displayed before switching to the Digit
dialling screen.
Note: Some mobile phones require the
Bluetoothwireless technology device
pairing to be set as ‘authorised’ or ‘trusted’
in order to automatically connect. Please
refer to your phone’s operating
instructions for further information.
PAIRING AND CONNECTING USING
THE TOUCH SCREEN
1. Switch on your mobile phone’s
Bluetooth® wireless technology device
connection. Make sure that your mobile
phone is in Bluetooth wireless technology
device discoverable mode, sometimes
referred to as find me mode (see your
phone’s operating instructions for more
information).
2. Switch the ignition on and make sure the
Touch screen is active.
3. From the Home menu select Phone.
4. A menu will appear. Select Search new.
5. Select the Vehicle to device option.
6. Identify your phone from the displayed list
and select the corresponding Pair and
connect option.
Note: If more than 5 phones are detected,
it may be necessary to use the scroll bar to
see the entire list.
7. When prompted, enter the PIN code into
your phone. See your phone’s operating
instructions for more information.
8. Once your phone is paired and connected
to the system, a confirmation message will
be displayed before switching to the Digit
Dial screen.
Note: Due to the duration of a Bluetooth
wireless technology device search, it is advised
that the timeout to home screen feature is
switched off before attempting to search for
devices. This setting can be changed within
Vehicle, Syst settings, Display set, Timeout to
home screen.
CHANGING THE CONNECTED PHONE
Up to 10 mobile phones can be paired with the
vehicle in the same way. However, only one can
be connected and ready for use as a phone at
any one time.
To connect a different paired phone to the
vehicle, follow the steps below:
1. From the Home menu, select Phone.
2. A menu will appear. Select Change phone.
3. Identify and select your phone from the
displayed list.
4. Once your phone is connected to the
system, a confirmation message will be
displayed before switching to the Digit
dialling screen.