Specifications

R
(FM10) SEMCON LAND ROVER OWNER GUIDE VER 2.00 EURO
LANGUAGE: english-en; MARQUE: landrover; MODEL: Range
Rover Evoque
Telephone
155
Before making use of the vehicle’s Bluetooth
wireless technology phone system, your
Bluetooth wireless technology device must be
paired and connected to the vehicle's system.
This is done using one of two methods; via
your phone to the vehicle or from the Touch
screen to your phone. If one of these methods
is not successful, try the other option.
Each time the ignition is switched on the
system will attempt to connect with the last
connected phone.
As mobile phones have a wide range of audio
and echo characteristics, it may take a few
seconds for the vehicle's system to adapt and
deliver optimum audio performance. To
achieve this, it may be necessary to reduce the
in-vehicle volume and ventilation fan speed
slightly.
TELEPHONE SAFETY
Switch off your telephone in areas
with a high explosion risk. This
includes filling stations, fuel storage
areas or chemical factories, as well
as places where the air contains fuel
vapour, chemicals or metal dust.
Always stow your mobile phone
securely.
The functioning of cardiac
pacemakers or hearing aids may be
impaired when the phone is in use.
Check with a doctor or manufacturer
whether any such devices you or your
passengers are using, are sufficiently
protected against high-frequency
energy.
The Health Industry Manufacturers'
Association recommends that a minimum
separation of 15 centimetres (6 inches) is
maintained between a wireless phone antenna
and a pacemaker, to avoid potential
interference with the pacemaker. These
recommendations are consistent with the
independent research by, and
recommendations of, Wireless Technology
Research.
TELEPHONE COMPATIBILITY
Please refer to the Owners section of the Land
Rover website at www.landrover.com, for a
list of compatible phones.
Note: The Bluetooth® wireless technology
devices listed, have been tested for
compatibility with Land Rover vehicles.
Performance will vary, based on the phone’s
software version, battery condition, coverage
and your network provider. Phones are
warranted by their manufacturer, not Land
Rover.
PAIRING AND CONNECTING USING
THE PHONE
Note: The process of pairing and connecting
your phone with the vehicle using the mobile
phone will vary depending on the type of
mobile phone used.
1. Switch the ignition on and make sure the
Touch screen is active.
2. From the Home menu, select Phone.
3. A menu will appear. Select Search new.
4. Select the Device to vehicle option.
Note: The vehicle’s Bluetooth® wireless
technology system is discoverable for only
3 minutes.
5. Using the mobile phone, search for
Bluetooth wireless technology devices.