Specifications

L
(FM10) SEMCON LAND ROVER OWNER GUIDE VER 2.00 EURO
LANGUAGE: english-en; MARQUE: landrover; MODEL: Range
Rover Evoque
Portable media
140
PLAYING A PORTABLE DEVICE
If you are using a USB mass storage device or
approved iPod, you can control playback using
the Touch screen controls.
If you are using a Bluetooth® wireless
technology device, you can control playback
using the Touch screen, but some controls are
unavailable.
If you are using any portable media device via
the AUX socket, then you must control
playback from the device itself.
Land Rover does not recommend the
use of a Hard Disc Drive via the USB link
while the vehicle is in motion. These
devices are not designed for in car use
and may be damaged.
CONNECTING MULTIPLE DEVICES
Do not plug non-audio devices into the
USB port.
You can connect multiple devices
simultaneously to the portable media interface
and switch between them using the Touch
screen. Select iPod, USB, Bluetooth or AUX,to
switch between modes.
The device docked first will remain the active
device until you choose to change.
If, after changing to the newly-docked device,
you change back to the first device, play will
resume at the point you left it (USB and iPod
only).
Note: You cannot use a USB hub to connect
more than 1 USB device to the audio unit.
Note: Devices connected to the iPod and USB
ports will be charged, but devices that are fully
discharged will not play.
Note: Options such as Repeat and Shuffle
relate to the device currently playing, they will
not apply to any subsequent device.
PAIRING AND CONNECTING USING
THE MEDIA PLAYER
For further information on Bluetooth®
wireless technology, see 154, BLUETOOTH®
INFORMATION.
Note: The process of pairing and connecting
your media device with the vehicle, using the
media device, will vary depending on the type
of media device.
1. Switch on the ignition and make sure the
Touch screen is active.
2. From the Home menu, select Audio/Video,
then the My music + soft key.
3. Touch Bluetooth.
4. A menu will appear. Select Change device.
5. Select Device to vehicle option.
Note: The vehicle’s Bluetooth® wireless
technology system is only discoverable for
3 minutes.
6. Using the media device, search for
Bluetooth wireless technology devices. On
some media devices, this is referred to as
new paired device. See your media device’s
operating instructions for further
information.
7. When the vehicle’s Bluetooth® wireless
technology system is discovered, follow
the on-screen instructions. Select Yes
when prompted, to confirm the pairing.
Either your device or the vehicle system
will ask for a PIN (Personal Identification
Number). When prompted, enter a PIN of
your choice and select OK to confirm.
8. Enter the same PIN into the other device.
9. Once your device is paired and connected
to the system, a confirmation message will
be displayed, before switching to the My
music, Bluetooth screen.