Specifications

L
(FM10) SEMCON LAND ROVER OWNER GUIDE VER 2.00 EURO
LANGUAGE: english-en; MARQUE: landrover; MODEL: Range
Rover Evoque
Driving aids
122
 Activation of the appropriate indicator.
When set at HIGH sensitivity, the Lane
departure warning system will not suppress
any warnings, if driver intervention is detected
(unless the appropriate indicator is activated).
If the Lane departure warning system detects a
fault or is not available, then the General
warning/information message (amber) will be
displayed in the Message centre. See 43,
GENERAL WARNING/INFORMATION
MESSAGE (AMBER).
Lane departure warning limitations
 When set at HIGH sensitivity, the vehicle’s
speed needs to be between 50 km/h and
180 km/h or 30 mph and 112 mph .
Dependent on the Instrument panel being
configured to display in mph or km/h.
 When set at NORMAL sensitivity, the
vehicle’s speed needs to be between 60
km/h and 180 km/h or 40 mph and 112
mph. Dependent on the Instrument panel
being configured to display in mph or
km/h.
 The lane in use must be wider than 2.5 m
(8.2 ft).
 No warning given if the correct indicator is
active.
 Not active in off-road conditions.
 Not available when the sand or mud-ruts,
Terrain Response programs are selected.
The performance of the Lane departure
warning system may also be affected in the
following conditions:
 Adverse driving conditions. For example
heavy fog, rain, snow, etc.
 Worn, damaged or temporary lane
markings, for example road works, etc.
 Tight deviations of the roads and their
gradients.
 Driving towards very bright lights/lamps.
 Driving very close to another vehicle.