Specifications

R
(FM10) SEMCON LAND ROVER OWNER GUIDE VER 2.00 EURO
LANGUAGE: english-en; MARQUE: landrover; MODEL: Range
Rover Evoque
Driving aids
121
 The windscreen area in front of the camera
is covered by a sticker, misted over, dirty,
covered in snow or mud, etc.
 Navigation information is incorrect.
 Travelling in an area not covered by the
Navigation system.
 Non-conforming road signs.
LANE DEPARTURE WARNING
The Lane departure warning system is
a driving aid only. It remains the
driver's responsibility to drive with
due care and attention, in a manner
which is safe for the vehicle, its
occupants and the other road users.
The driver should still observe all
other road signs, road markings and
situations that are not detected or
recognised by the Lane departure
warning system.
Press the button to disable/enable the Lane
departure warning system.
When enabled, an indicator lamp will illuminate
in the Message centre to confirm. The status of
the system is also shown by the changes of the
lane icon colours and the vehicle position icon
within the indicator lamp.
The Lane departure warning system can also
be switched off/on via the Vehicle Set-up
Instrument panel menu. See 40, INSTRUMENT
PANEL MENU.
Note: When the ignition is switched on, the
Lane departure warning system will remain at
the previous on or off status and also retain the
previous settings.
The Lane departure warning system uses the
forward facing camera, located in the base of
the rear view mirror.
Note: Make sure the windscreen area in front
of the rear view mirror is kept clean and free of
debris, for example, mud, snow, ice, etc.
If the vehicle crosses either of the lane
markings that it is travelling within, without
activation of the appropriate indicator, then the
Lane departure warning system will alert the
driver via one of the methods below:
 Steering wheel vibration (haptic
feedback).
 Graphical displays in the Message centre.
Note: The Lane departure warning system will
only provide warnings to the driver. It will not
assist in changing the direction of the vehicle
or operate any of the vehicle's systems.
Note: The Lane departure warning system will
not detect unmarked edges of the road.
The sensitivity of the Lane departure warning
system can be adjusted between HIGH or
NORMAL via the Vehicle Set-up menu in the
Instrument panel menu.
When set at NORMAL sensitivity, the Lane
departure warning system will suppress any
warnings, if driver intervention is detected, as
listed below:
 Operation of the accelerator pedal.
 Significant movement of the steering
wheel.
 Operation of the brakes.