Specifications

L
(FM10) SEMCON LAND ROVER OWNER GUIDE VER 2.00 EURO
LANGUAGE: english-en; MARQUE: landrover; MODEL: Range
Rover Evoque
Driving aids
120
Driving aids
TRAFFIC SIGN RECOGNITION
The Traffic sign recognition system is
a driving aid only. It remains the
driver's responsibility to drive with
due care and attention, in a manner
which is safe for the vehicle, its
occupants and the other road users.
The driver should still observe all
other road signs, road markings and
situations that are not detected or
recognised by the Traffic sign
recognition system.
The Traffic sign recognition system uses the
forward facing camera, located in the base of
the rear view mirror. which detects speed
signs, no overtaking signs and variable
overhead speed signs to display symbols of the
detected signs in the Message centre. Traffic
signs with extra information (for example,
reduced speed limits for wet road conditions)
will also be detected and compared with the
vehicle’s systems (for example, rain sensor,
wipers, etc.) and may also be displayed in the
Message centre. Speed limit information from
the Navigation system will be displayed for
roads with no signage.
Note: If the Navigation is not available, the
Traffic sign recognition system will use the
camera only.
Note: Make sure the windscreen area in front
of the rear view mirror is kept clean and free of
debris, for example, mud, snow, ice, etc.
The Traffic sign recognition system can be
switched on and off via the Vehicle Set-up
menu from the Instrument panel. See 40,
INSTRUMENT PANEL MENU. The system will
operate up to a maximum speed of 250 km/h
(155 mph).
The 3 basic functions of the Traffic sign
recognition system are as follows:
 Speed limit detection. A corresponding
sign will be displayed in the Message
centre.
 Speed alert. When the vehicle's speed is
greater than (or equal to) the detected
speed limit, a flashing red ring, around the
displayed speed limit sign, will be
displayed in the Message centre.
Speed alert can be switched on/off or the
settings can be adjusted to display at 3
different settings:
 When the vehicle's speed equals the
detected speed limit.
 When the vehicle's speed is 5 mph or
10 km/h above the detected speed
limit. Dependent on the Instrument
panel being configured to display in
mph or km/h.
 When the vehicle's speed is 10 mph or
20 km/h above the detected speed
limit. Dependent on the Instrument
panel being configured to display in
mph or km/h.
 No overtaking zone. When a no overtaking
sign has been detected, the system will
also display a corresponding sign in the
Message centre.
Note: The Traffic sign recognition system will
not detect road markings or situations with no
signage, for example railway crossings, etc.
Traffic sign recognition limitations
The system may provide false information or
function incorrectly in the following conditions:
 Travelling in adverse weather conditions.
For example, heavy fog, rain, snow, etc.
 Concealed or covered signage.
 Driving towards very bright lights/lamps.