Specifications

L
(FM10) SEMCON LAND ROVER OWNER GUIDE VER 2.00 EURO
LANGUAGE: english-en; MARQUE: landrover; MODEL: Range
Rover Evoque
Adaptive cruise control
110
DETECTION BEAM ISSUES
Detection issues can occur:
1. When driving on a different line to the
vehicle in front.
2. When a vehicle edges into your lane. The
vehicle will only be detected once it has
moved fully into your lane.
3. There may be issues with the detection of
vehicles in front when going into and
coming out of a bend.
4. When moving around a stationary vehicle.
This may cause uncertainty as to which
vehicle should be followed.
5. When the vehicle ahead turns out of your
lane. This may cause uncertainty as to
which vehicle should be followed.
In these situations ACC may operate
unexpectedly. The driver should stay alert and
intervene if necessary.
ACC MALFUNCTION
If a fault occurs while ACC or Follow mode is
operational, ACC will switch off and cannot be
used until the fault is cleared. The message
DRIVER INTERVENE is displayed briefly in the
Message centre and is then replaced by the
message CRUISE NOT AVAILABLE.
If a fault with ACC or any related system occurs
at any other time, the message CRUISE NOT
AVAILABLE will be displayed. It will not be
possible to activate ACC in any mode.
Accumulations of dirt, snow or ice on the radar
sensor or cover may inhibit ACC operation.
Fitting of a vehicle front protector or metallised
badges may also affect ACC operation.
If this occurs in ACC cruise /Follow mode, the
audible alarm sounds and the message
DRIVER INTERVENE is displayed briefly. The
message RADAR SENSOR BLOCKED will then
be displayed.
Note: The same messages may also be
displayed while driving on open roads with few
objects for the radar to detect.