Specifications

R
(FM10) SEMCON LAND ROVER OWNER GUIDE VER 2.00 EURO
LANGUAGE: english-en; MARQUE: landrover; MODEL: Range
Rover Evoque
Adaptive cruise control
109
RESUMING THE SPEED AND
FOLLOW MODE
RES should only be used if the driver is
aware of the set speed and intends to
return to it.
By pressing the RES button after ACC has been
cancelled (e.g. after braking), ACC will become
active again provided that the set speed
memory has not been erased. The original set
speed will be resumed (unless a vehicle ahead
causes the Follow mode to become active) and
the set speed will be displayed in the Message
centre. Queue assist may be resumed above 10
km/h (6 mph).
Note: When the set speed is resumed, the rate
of acceleration is influenced by the previously
set Follow mode gap. A closer set gap will
promote greater acceleration.
Note: When resuming a set speed while in a
curve, acceleration is reduced. A more severe
curve will reduce acceleration further.
Remember that ACC and Queue assist are
primarily for use when minimal steering is
required.
HINTS ON DRIVING WITH ACC
During some situations ACC may provide the
driver with an indication that intervention is
required.
An audible alarm will sound, accompanied by
the message DRIVER INTERVENE in the
Message centre if ACC detects:
A failure has occurred while the system is
active.
That using maximum ACC braking only is
not sufficient.
Note: ACC only operates when the gear
selector is in Drive (D) or Sport (S).
Note: When engaged, the accelerator pedal
rests in the raised position. Fully release the
pedal to allow normal ACC operation.
Note: When braking is applied by ACC, the
vehicle brake lamps will illuminate.
Note: When Intelligent stop/start is fitted, it
may operate during a Queue assist stop. Press
the accelerator pedal for longer than normal to
restart the engine and move off.