Specifications

R
(FM10) SEMCON LAND ROVER OWNER GUIDE VER 2.00 EURO
LANGUAGE: english-en; MARQUE: landrover; MODEL: Range
Rover Evoque
Adaptive cruise control
107
ENTERING FOLLOW MODE
When in Follow mode, the vehicle
may not decelerate automatically to a
stop, nor will the vehicle always
decelerate quickly enough to avoid a
collision.
Note: Follow mode is an integral function of
ACC. You cannot disengage Follow mode and
still use Cruise control to maintain your speed.
Once a set speed has been selected, the driver
can release the accelerator and the set road
speed will be maintained.
If a vehicle ahead enters the same lane or a
slower vehicle is ahead in the same lane, your
vehicle speed will adjust automatically until the
gap to the vehicle ahead corresponds to the
gap setting. The vehicle is now in follow mode.
The Follow mode warning lamp will illuminate
to confirm Follow mode is operational (see 45,
FOLLOW MODE (AMBER)).
The Message centre will display the gap set in
the form of a vehicle with a varying number of
bars in front of it.
The vehicle will then maintain the constant time
gap to the vehicle ahead until:
 The vehicle ahead accelerates to a speed
above the set speed.
 The vehicle ahead moves out of lane or out
of view.
 A new gap setting is chosen.
If necessary, the vehicle brakes will be
automatically applied, slowing the vehicle and
maintaining the gap to the vehicle in front.
The maximum braking which is applied by ACC
is limited and can be overridden by the driver
applying the brakes, if required.
Note: Driver braking will cancel ACC.
If ACC predicts that its maximum braking level
will not be sufficient, then an audible warning
will sound while ACC continues to brake.
DRIVER INTERVENE will be displayed in the
Message centre. Take immediate action.
When in follow mode, the vehicle will
automatically return to the set speed when the
road ahead is clear, for instance when:
 The vehicle ahead accelerates to a speed
above the set speed, or changes lane.
 You change lane to either side or enter an
exit lane.
The driver should intervene if appropriate.
If a direction indicator is used, ACC will reduce
the gap to the vehicle ahead so as to respond
more quickly to the anticipated manoeuvre. If a
manoeuvre is not actioned, the previous gap
will be restored after a few seconds. Enhanced
response may not occur if ACC detects that it is
inappropriate, i.e., you are already too close to
the vehicle ahead or you are already in another
lane.
CHANGING THE FOLLOW MODE SET
GAP
It is the driver’s responsibility to
select a gap appropriate to the driving
conditions.
4 gap settings are available. The selected gap
setting is displayed in the Message centre
when the gap adjustment buttons are operated.
Each gap is indicated by an additional bar in
front of the vehicle icon in the Message centre.
After the ignition is switched on, the default
gap (gap 3) will be automatically selected ready
for ACC operation.
If the Terrain Response, Grass-Gravel-Snow
mode is selected, then the longest gap (gap 4)
will initially be selected.