Use and Care Manual

Attaching Pot Rack to Wall
1. Always protect the area directly below where you are going to hang your pot
rack by laying a drop cloth or tarp over the area below the installation area.
2. Determine where you are going to hang your pot rack. Do not hang the pot rack
too high, as you can use the top shelf for displaying smaller items or placing
other decor.
3. Using a stud finder, run along wall where you are going to install the pot rack to
locate the studs in the wall. For safest installation, we strongly recommend that
the top shelf hole and the bottom shelf middle hole be located and attached to a
wall stud.
4. Hold pot rack up to wall and mark where the four wall screws will be placed
once you have located the wall studs. (See arrows in photo 3 indicating where
the pot rack will attach to the wall.) Make sure to use a level when performing
this task to ensure that you are hanging the pot rack level. Using a partner
from this step forward is always helpful.
Photo 3
Tools Needed For Pot Rack Installation
•Tape Measure
•Hammer
•Pencil
•Stud Finder
•Screwdriver
•Drill
•Level
What You Should Do Prior To Hanging Your Pot Rack
1. Measure the workable area in your kitchen that you would like to hang your pot
rack to ensure you have enough room to easily access items you place on the
pot rack.
2. Assemble pot rack and have a partner hold it in position to determine how high
you should hang the pot rack. Measure the distance using the largest pan you
will be hanging from your pot rack.
3. If you are mounting into brick or masonry, you will need to visit your local
hardware store for proper installation tools and screws/bolts.
4. We highly recommend you consult a professional in your area if you are unsure
of the proper way to hang your pot rack. Poor installation of the pot rack could
result in property damage or personal injury.
54