0 MIC LEVEL 0 8 OL L1 P2 L2 INPUT P1 +12 LOW –12 +12 HIGH –12 2 10 6 A LEVEL 0 4 8 PROGRAM A 6 4 6 2 8 0 10 B 0 +12 -24 8 4 –24 10 2 -12 A 0 –12 0 +12 2 10 6 B LEVEL 0 4 8 PROGRAM B +12 LOW –12 +12 HIGH –12 L1 P2 L2 INPUT P1 2 10 6 LEVEL 0 4 HOUSE 8 A PGM CUE PAN B 2 CUE 10 6 8 PHONES LEVEL 0 4 POWER MIXER MP 2S DJ MIXER 2 6 MIC 4 MP 2S
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
OPERATORS MANUAL MP 2S CLUB MIXER MIC 4 2 L1 P2 L2 4 8 0 0 PROGRAM A P1 6 2 10 MIC LEVEL –12 OL INPUT +12 LOW –12 +12 HIGH 10 A LEVEL 4 6 8 10 –12 –24 PROGRAM B B 0 8 0 2 +12 6 +12 0 -12 -24 A 10 8 6 4 2 0 4 2 L1 P2 L2 8 0 10 B LEVEL PAN HOUSE P1 6 4 2 –12 +12 LOW –12 HIGH INPUT PHONES CUE 8 0 +12 PGM 6 10 LEVEL 4 6 0 10 2 A CUE B MP 2S 8 LEVEL MIXER POWER QUICK START If you are too excited to read the manual, at least read this
FRONT PANEL DESCRIPTION 6 MIC 4 2 L1 P2 L2 4 8 0 –12 MIC LEVEL OL INPUT 2 +12 –12 LOW +12 HIGH 3 10 4 6 8 10 PROGRAM B B 0 8 0 2 +12 6 2 10 1 0 PROGRAM A P1 6 9 +12 –12 -12 –24 -24 A LEVEL 4 5 A 10 8 6 4 2 0 4 0 2 L1 P2 L2 8 0 10 B LEVEL PAN HOUSE P1 6 4 2 –12 +12 –12 LOW 5 4 HIGH 3 PHONES CUE 8 0 +12 PGM 6 10 INPUT LEVEL 2 7 4 6 0 10 2 A CUE B MP 2S 8 LEVEL 8 10 MIXER POWER 11 1 MIC LEVEL control: adjusts the Leve
REAR PANEL DESCRIPTION 4 MP 2S 100-240 V 50/60 Hz 7 WATTS COMMERCIAL AUDIO EQUIPMENT 24TJ R ACN 001 345 482 RANE CORP. MADE IN U.S.A. 8 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Fader Cleaning With heavy use in harsh environments, the faders may need lubrication. This treatment extends longevity and can make used faders as good as new. The fader assembly must be removed from the MP 2S for proper cleaning. We recommend any of the following cleaning solutions: Caig DeoxIT FaderLube F100 spray lubricant (www.caig.com) Caig DeoxIT FaderLube F5 spray cleaner (www.caig.com) CRC 2-26 (www.crcindustries.com) Order DeoxIT® from: CAIG Laboratories, Inc. 12200 Thatcher Ct.