Specifications

8
OM-SSB-3E/5E/10EF
Initial Startup
After the SmartSteam100 Boilerless Steamer has been
installed, test it to ensure that the unit is operating
correctly.
1. Remove all literature and packing materials
from the interior and exterior of the unit.
2. Make sure the water supply line is open.
3. Turn on electrical service to the unit. The
steamer will not operate without electrical power.
Do not attempt to operate the unit during a power
failure.
NOTE: The door MUST be closed for the elements
to operate.
4. To turn unit on, press the ON switch on the
control panel.
5. When the steam generating reservoir has
filled with water, the heaters will begin
heating automatically. Within 20 minutes
or less the READY light will come on,
indicating that the water has reached
its standby temperature. When the READY
light is displayed, you may take any one
of the following steps:
a. Push TIMED and set the timer knob to
the desired steaming time.
b. Push MANUAL for continuous
steaming.
c. Push STOP to let the unit stay at
ready condition.
WARNING
WHEN YOU OPEN THE DOOR, STAY AWAY
FROM STEAM COMING OUT OF THE UNIT.
STEAM CAN CAUSE BURNS.
6. To shut down the unit, press the OFF switch.
The steam generating reservoir will then fill
with cold water and drain.
7. If the steamer operates as described, the unit
is functioning correctly and ready for use.
8 OM-SSB-E