Specifications

Preventive Maintenance

Randell strongly suggests a preventive maintenance program which would include the

following Monthly procedures:

1. Cleaning of all stainless steel parts.

2. Clean all fan blades

3. Check and Lubricate door hinges with lithium grease.

4. Clean all gaskets on a weekly if not daily basis with a

solution of warm water and a mild detergent to extend gasket life.

Recommended cleaners for your stainless steel include the following:

JOB CLEANING AGENT COMMENTS

Routine cleaning

Soap, ammonia, detergent

Medallion

Apply with a sponge or cloth

Fingerprints and smears Arcal 20,Lac-0-Nu,Ecoshine Provides a barrier film

Stubborn stains and

discoloration

Cameo, Talc, Zud, First

impression

Rub in the direction of the polish

lines

Greasy and fatty

acids, blood,

burnt-on foods

Easy-Off, De-grease It, Oven aid

Excellent removal on all finishes

Grease and oil Any good commercial detergent Apply with a sponge or cloth

Restoration/Passivation Benefit, Super Sheen Good idea monthly

Reference: Nickel Development Institute, DiverseyLever, Savin, Ecolab, NAFEM

Do not use steel pads, wire brushes, scrapers or chloride cleaners to clean your

stainless steel.

CAUTION: DO NOT USE ABRASIVE CLEANING SOLVENTS, NEVER USE HYDROCHLORIC ACID (MURIATIC ACID) ON

STAINLESS STEEL.

Proper maintenance of equipment is the ultimate necessity in preventing costly repairs. By

evaluating each unit on a regular schedule you can often catch and repair minor problems

before they completely disable the unit and become burdensome on your entire operation.