Specifications

Figure B - Temperature control adjustments

The control knob allows for temperature

adjustments, with in the cabinet only. Turning

the knob clockwise will result in increased

cooling. Keep the arrow on the knob pointed

within the green arc. Turning it clockwise

beyond the green can result in freeze-up, while

turning it counterclockwise beyond the green

will shut the compressor off. If your cabinet

temperature remains to warm and your

temperature control is at the maximum setting

you may need to adjust the pressure control.

Your units pressure control should be set at

the time of installation by a qualified

installation contractor. If minor adjustments

are needed at a later date, adjust control by

turning the right adjusting screw clockwise

(1/4 turn at a time) to a lower number for

colder temperature and counterclockwise to a

higher number for warmer temperature.

Note: Numbers are pounds of pressure not degrees F.

Note: Do not adjust the differential screw (Left screw).

Note: Temperature Controls located behind louver on top of unit.