FCC Compliance Statement IC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with Part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1.
About GPS The Global Positioning System (GPS) is a constellation of satellites that a GPS receiver uses to calculate geographical positions. To determine a position, data from at least three satellites is required. To determine elevation, the data from four or more satellites is required. Accuracy of the positioning varies from 10 feet to several hundred feet, depending on vehicle placement and the surrounding environment.
Table of Contents Table of Contents 1. Your Device....................................................................................... 1 What’s Included............................................................................... 2 Install the Mount............................................................................. 2 TND™ Tablet 85 Hardware............................................................... 3 2. Getting Started.......................................................................
1. Your Device Caution: Important Safety Information Navigation • Use this device at your own risk. • Use this device only when it is safe to do so. • Look at the display only when it is safe to do so. • Traffic regulations always have priority over any instructions from the navigation system. Device • Do not use sharp-edged objects on the device touch screen. • The device is not waterproof and is not protected against water damage. • Protect the device from extreme temperatures.
1. Your Device What’s Included Install the Mount Rand McNally TND™ Tablet Note: Follow all local regulations governing the placement of the mount. • Two-piece mount: - Magnet - Bracket with suction cup • Quick Start Guide • Anti-glare screen protector • Vehicle charger • Wall charger • USB cable 1. Select an area with a line of sight to the sky and GPS satellites. 2. Clean and dry the mounting area. 3. Remove the suction cup protective film. 4. Attach the two pieces of the mount together. 5.
1.
2. Getting Started Connecting to Wi-Fi When you first turn on your tablet, you’ll be asked to select a Wi-Fi network to connect to the Internet. A Wi-Fi connection is required to browse the web, download apps, and use Internet-enabled features such as weather and traffic. Choose your wireless access point or hotspot from the list and type in your password. Note: If you skip this step, you will not be able to use all the features of your tablet.
2. Getting Started Android User Interface Navigating Your TND Tablet 85 2 Swipe down at top to view settings 1 4 3 7 B C D E Bluetooth® 2 Do not disturb 3 Wi-Fi is on 4 Indicates remaining battery power 5 Current time 6 Settings 7 View installed apps 8 Back 9 Return to last home screen 10 View open apps 5 6 A 1 Main Menu 8 TND™ Tablet 85 User Manual 9 10 A Rand Navigation 2.
2. Getting Started TND Tablet 85 Quick Settings TND™ Tablet 85 User Manual • Bluetooth – Pair with another device using Bluetooth. • Wi-Fi – Connect to a wireless network. • Connect to Car Stereo – Connect your headphone output to a vehicle aux input. • Driving Mode Restrictions – Set restrictions on app usage while driving. • Configure Homescreen – Add, delete, or rearrange apps located in the folders of your T85’s homescreen. • Android Settings– Opens the Android device settings screen.
2. Getting Started Android Settings TND™ Tablet 85 User Manual • Do not disturb – Options for disabling notifications and alarms. • Network & Internet – Options for Wi-Fi, data usage, tethering, VPN, and Airplane mode. • Connected devices – Options for Bluetooth, Cast, printing, and USB. • Apps & notifications – Options for notifications, app permissions, default apps, and access. • Battery – Displays battery life and power options.
3. Rand Navigation 2.0 Home Screen 2 1 1 Single-line Search Tap to begin tying, and enter a destination, address, or Point of Interest. You can access any destination from the single-line search. 2 Map View Mode Tap to switch the map view: 3D map, North up, or Heading up. 3 Wi-Fi Connected Services Tap to enable fuel prices, weather and traffic on the map. 4 oom Z Tap + or - to zoom in or out on the map. 5 Return to current location Tap to view your current location on the map.
3. Rand Navigation 2.0 1. Tap Up or Down to view options. 2. Tap the option to be set. 3. Enter the new information. 4. Tap Back Page Route to save changes. Truck Tools Preferences Preferences Page General Language................................................10 Unit.........................................................10 Clock......................................................10 Yard time zone.......................................10 Vehicle type.......................................
3. Rand Navigation 2.0 General Options General Options Language Load Prompt English Español Français For the screen and spoken instructions. Units U.S. Standard Metric Automatic Clock 12-hour format 24-hour format Note: Some tools and settings may not be available in car mode.
3. Rand Navigation 2.0 Truck Info Options Route Options Hazmat Type Traffic On/Off slider (requires Wi-Fi connection) Recalculation Auto Manual Preferred Route Fastest route Shortest route ETA Adjustment Increase ETA more Increase ETA some ETA ok Decrease ETA some Decrease ETA more None Explosives Gases Flammable Liquids Flammable Solids Oxidizers Poison Radioactive Corrosives PIH Other Weight (Empty) Click the pencil icon to enter a numeric value.
3. Rand Navigation 2.0 Map Options Map Options Day/Night Mode Truck POI Icons Automatic Day Night Route Color Tap the color to select. Map View Mode Heading up North up 3D view Map Auto Zoom On/Off Auto scale Street scale City scale State scale Select icons to display on map Select travel centers, service, weigh stations and truck POIs to display on the map. Tap any category to fill in the square and display those icons.
3. Rand Navigation 2.0 Warnings Options Warnings Options Warning Type None Audio & Visual Visual only Audio only Speed limit Auto Dismiss Warnings Never After 2 seconds After 10 seconds After 30 seconds On/Off slider Set the amount over the posted limit at which the warning appears. Set a user-defined maximum speed to be warned whenever the truck exceeds that speed, regardless of posted speed limits.
3. Rand Navigation 2.0 Destination Search 7 1 2 3 4 To access this window from the Home Screen, tap Where to? 1 ingle-line Search S Begin typing to search for a destination. 2 uided Search G Tap to access the guided search options. 3 Points of Interest Tap to search for a point of interest (POI), such as a travel center, restaurant, etc. 4 History Tap to route to a recently entered location. 5 Bookmarks Tap to view a list of saved locations.
3. Rand Navigation 2.0 Single-line Search 6 1 3 2 To access the single-line search window from the Home Screen, tap Where to? From this screen, you can begin typing an address, point of interest, or any other destination type. The single-line search will return matching results below. 6 4 5 TND™ Tablet 85 User Manual 1 ddress/Text Search A Search for addresses, streets, cities and points of interest. • Address searches should include either a city or postal code. • Avoid using punctuations.
3. Rand Navigation 2.0 Guided Search 1 2 5 TND™ Tablet 85 User Manual 3 6 1 ew Location N Tap to route to a destination by entering the address, city center, intersection, or by entering latitude and longitude coordinates. 2 y Trips M Tap to review your saved trips. 3 History Tap to review your recent destinations. 4 ddress Book A Tap to select a destination from your Address Book. 5 POIs Tap to begin a point of interest search. 6 Home Tap to route to your stored Home location.
3. Rand Navigation 2.0 Using Guided Search 2 The Guided Search Keyboard in the Rand Navigation 2.0 app helps you quickly locate your destination. 3 1 uto-Complete Keyboard A As you key in characters, the keyboard only displays the next possible letter or number. Letters and numbers that cannot be entered in sequence are disabled. Results are displayed as you key in characters. 2 estination Entry D The top bar displays the current search.
3. Rand Navigation 2.0 New Location 5 1 2 3 1 ddress A Navigate to an address by entering the city (or postal code), street, and house number. 2 ity Center C Navigate to a city center. 3 Intersection Navigate to the intersection of two roads within a specified city. 4 Coordinates Navigate to a coordinate location. Note: Rather than a city/street search, using the Coordinates Guided Search prompts you to enter a numeric latitude and longitude value.
3. Rand Navigation 2.0 My Trips 1 TND™ Tablet 85 User Manual 2 1 Multi-Stop Trips Tap to view a list of saved multi-stop trips or to create a new one. 2 rails T Use Trails to record a “bread-crumb” path where your truck has traveled.
3. Rand Navigation 2.0 Multi-Stop Trips Displays a list of recent destinations. 1 1 Tap to review and edit a saved trip. 2 Tap + New Trip to start a new multi-stop trip. 3 Trip details: Displays the stops along your trip. Tap the X to remove a stop. Tap + Add a Location to add a new stop. 2 4 Tap to view Route avoids, Route details, and Overview. Also tap to Save to My trips. 5 6 7 3 8 5 6 Tap to Reverse or Reorder your stops (manually or automatically).
3. Rand Navigation 2.0 3 Trails Use Trails to record a “bread-crumb” path where your truck has traveled. The Trails feature is beneficial when traveling in areas where there is no road network. 1 2 1 Tap to open an existing trail. 2 Tap to record a new trail. 3 Tap to edit or delete a trail. 4 Tap to stop recording. 5 View details about the trail. 6 Tap to begin navigation. Routing to an existing trail will take you to the start of the trail.
3. Rand Navigation 2.0 History 3 1 2 TND™ Tablet 85 User Manual Displays a list of recent destinations. 1 estination D Tap an entry in the list to navigate to the destination. 2 istance D Displays the distance to each destination from your current location. 3 Options Tap to access additional options. Edit: Allows you to select and delete an entry in the history list. Clear History: Deletes all entries.
3. Rand Navigation 2.0 Address Book Displays your saved bookmarks, contacts, and group. 1 2 ookmarks B Navigate to a a saved address. 2 ontacts C Navigate to the stored address from a saved contact. Note: Contacts are stored in the Contacts app. You can add contacts manually or import them. 3 Groups Options for organizing your bookmarks and contacts into groups. 4 Destination Tap a bookmark to navigate to the destination.
3. Rand Navigation 2.0 Address Book: Contacts 3 2 In order to use contacts for navigation, you first need to set them up in the Rand Navigation 2.0 app. You can add contacts manually or import them. 1 reate a New Contact C Tap to manually create a new contact. 2 earch S Tap to search for an existing contact. 3 View Tap a contact’s name to view and edit information about that contact. 4 Edit Contact Enter information about the contact. Tap Save to save and return to the previous screen.
3. Rand Navigation 2.0 Address Book: Groups Use Groups to organize your contacts and destinations into categories for easier searching. 1 1 vailable Groups A Displays the groups you have created. 2 ew Group N Tap to create a new group. 3 Group Destination Displays the destinations stored in the selected group. Tap a destination to begin navigation. 4 Group Options Tap in the corner to edit or delete destinations in a group. 5 Add Location Tap to add a new location to the group.
3. Rand Navigation 2.0 POIs Displays Points of Interest (POIs) near your current location, near a specific location, along your intended travel route, or near your destination. 1 2 3 5 6 TND™ Tablet 85 User Manual 1 y Truck M Tap to display POIs near your current location. 2 city A Tap to display POIs near a specific city. 3 My route Tap to display POIs along your route. 4 My destination Tap to display POIs near your destination. 5 POI Categories Tap to select the POI category.
3. Rand Navigation 2.0 4 Filter POIs 3 Truck-related points of interest such as Travel Centers and Truck Services can include several amenities. To select only the locations with the amenities that you are interested in, filter your search results. 1 1 earby Places N Lists destinations near your location that match the category selected. 2 ap M Displays destinations near your location. 3 Filter Search for points of interest by selecting available services.
3. Rand Navigation 2.0 POIs When you select a POI category, a list of suggestions provided by Yelp (if applicable) and a list of nearby places display. 1 Note: A Wi-Fi connection is required in order to display Yelp information. 3 1 elp Suggestions Y Displays top-rated suggestions from Yelp. Tap a destination to view additional information and begin navigation.
3. Rand Navigation 2.0 Home/Work You can set bookmarks for a Home and a Work location. This is useful so you can quickly navigate to these destinations. Tap Add Work or Add Home to set these locations. 1 2 1 elect Location S Tap New Location, History, or POIs to select a Home or Work destination from among these options. 2 hoose on Map C Tap to set your Home or Work location by selecting a point on the map. 3 Use Current Location Tap to set your Home or Work location to your current location.
3. Rand Navigation 2.0 History & Bookmarks 1 1 istory H Displays your destinations that you have previously navigated to. 2 ookmarks B Displays your saved locations. For both History and Bookmarks: Tap on the title of the tab to display the list of destinations. Tap the destination to begin navigation.
3. Rand Navigation 2.0 Route Map Window Settings Tap to open the Settings screens. 9 1 3 2 4 10 ETA/Time/Distance Tap to change the view between the following options: ETA, Yard ETA, Remaining Time, Yard Time, and Elevation. 11 L ocation View Tap to toggle between displaying the current location by city, street name, or by the next cross street. 12 irtual Dashboard V Tap to view information about your current location, route, trips, and more.
3. Rand Navigation 2.0 Exits Slide out to show points of interest at upcoming exits. The list displays the distance to the next exit, exit name and number, and a count of available amenities. 1. Tap on an exit to display a list of POIs at the exit. 2. Tap the icon to display locations by category. 3. Tap on any item in the list to view additional information or to route to the POI.
3. Rand Navigation 2.0 Route Options 7 Route Overview Displays the directions, highways and summary of your trip. 1 1 2 3 4 5 Trip Summary (for multi-stop trips) 6 2 earch/Add Stop S Tap to add an additional destination(s) to your route. 3 Detour/Avoid Tap to manage locations to avoid on the route, and automatically calculate detours around them. 4 Route Settings Tap to open the Route tab of the Settings screen.
3. Rand Navigation 2.0 Route Overview Directions Tab 1 Direction Tab Displays the turn-by-turn directions for the current route. 1 Highways Tab 2 ighways Tab H Displays the highways along your route, with the number of miles to travel on each. 3 Summary Tab Displays the total travel time and distance for your route, as well as summaries for each leg of the trip (for multi-stop trips).
3. Rand Navigation 2.0 Detour/Avoid From Route Options, tap Detour/Avoid. There are four options available to set up detours and permanent avoids: 1. Next miles allows you to detour a certain number of miles. Use the slider to set the number of miles to detour/avoid. 2. A road allows you to avoid a specific road. 3. An area allows you to draw a polygon on the map. You will be routed around this area. 4. Along the route allows you to select a step in your navigation to avoid.
3. Rand Navigation 2.0 Detour/Avoid 1 When selecting A road, zoom in and out on the map to center the target over the road to avoid. The road is highlighted in red. Tap Permanent Avoid to always avoid it. Tap Detour to avoid it on this trip. When selecting An area, tap on the map to set points for an area to avoid. Tap Permanent Avoid to always avoid it. Tap Detour to avoid it on this trip. 2 3 TND™ Tablet 85 User Manual When selecting Along the route, select the step on the route you wish to avoid.
3. Rand Navigation 2.0 Weather 1 When enabled, Weather displays current weather condition overlays on the map. 2 Notes: • • • 6 3 4 TND™ Tablet 85 User Manual 5 Requires a Wi-Fi connection. The refresh speed of the weather display is dependent on the connection speed. Weather information is updated every few minutes while Wi-Fi connection is active. Weather display depends on active weather patterns and map zoom level.
3. Rand Navigation 2.0 Traffic To view traffic information, tap to enable the Traffic slider on the map screen. Traffic conditions will overlay on the map when traffic is enabled. Note: Requires a Wi-Fi connection. 1 2 1 Tap to enable traffic. 2 Tap to view details and enter settings. 3 Select to view traffic flow, incidents, or both (All). 4 Displays the current traffic conditions/incidents along your route. 5 Displays the distance of the traffic conditions/incidents.
3. Rand Navigation 2.
3. Rand Navigation 2.0 Fuel To view fuel price information, tap to enable the Fuel slider on the map screen. Current fuel prices will overlay on the map at various stations when enabled. 1 Note: Requires a Wi-Fi connection. 2 3 1 Tap to enable fuel prices. 2 Tap to view details and enter settings. 3 Select to view fuel prices nearby, or along your route. 4 Displays the fuel stations based on the criteria you selected. 5 Displays the distance to each station. 6 Tap to sort fuel options.
3. Rand Navigation 2.0 Virtual Dashboard 12 9 11 6 1 Current location. 2 Displays current times at the yard, current location and destination, as well as estimated time of arrival. 3 Sunrise and sunset times based on vehicle location (latitude/longitude) and day. 4 Current speed (above) and posted speed limit (below). 5 3 4 7 1 Note: Turns red when speed limit warning exceeded. 2 8 10 TND™ Tablet 85 User Manual 5 Elevation at current location. 6 Current leg progress.
3. Rand Navigation 2.0 Fuel Logs 1. From the Virtual Dashboard, tap Add Fuel. 2. Tap a field to enter information. You can edit the following fields: Fuel quantity, Fuel price, Total cost, Taxable, Location, Station, Date, Last odometer, Current odometer. Distance, Current economy, and Average economy are calculated automatically based on your entries. 3. Tap Save to record the fuel purchase.
3. Rand Navigation 2.0 Junction View hen on a route, Junction Views display when you have an upcoming W maneuver. Set distance in Settings > Route. Once past the maneuver, Junction View closes and the previous window displays. 1 1 Signs to follow for the next maneuver. Includes exit number and highway name/number if applicable. 2 Distance to the upcoming maneuver. Distance decreases as you approach the ramp. 3 Lane assist arrow. 4 Return to previous window.
3. Rand Navigation 2.0 Truck Tools To access, tap Truck Tools from the Main Menu. 1 S tatus, Mileage & Fuel View driving information, mileage logs, and fuel purchase information. 2 Quick Planner Between any two cities or towns, quickly calculate the distance, driving time, and cost. 3 Tell Rand Compose a message to send to Rand McNally. 4 Import Data & Export Data Transfer address books, custom POIs, and saved trips from your old TND device.
4. TripMaker® TripMaker is a trip planning app that allows you to easily browse the map and set up a multi-stop trip. Add via points and send your trip to the Rand Navigation 2.0 app for truck-friendly routing. Please note that TripMaker does not provide truck routing. View Help in the TripMaker app to learn more.
5. Motor Carriers’ Road Atlas A digital version of Rand McNally’s Motor Carriers’ Road Atlas. Tap Maps at the top right to select pages by state. Tap Legend at the left to view the map legend. Swipe with one finger to move the center of the map. Use two fingers to zoom in and out.
6. Dash Cam Record high quality video of your travels with the Dash Cam app. 2 3 4 1 5 1 Tap to start or stop recording. 2 Set your video preferences. 3 Tap to view Gallery. 4 Tap to record audio or mute. 5 Tap to take a still photo. 6 Tap to change settings. To enable loop recording and segment settings you must use a Micro SD Card. 7 Tap to return to the Dashcam window.
7. DriverConnect DriverConnect 2 The DriverConnect app provides a fully-compliant electronic logbook solution. DriverConnect lets you track and log Hours of Services, DriverVehicle Inspection Reports, Fuel purchases, and more. Reports can be generated for roadside inspections. The DriverConnect app connects to a Rand McNally Electronic Logging Device (ELD) over a Bluetooth connection.
8. More Information For more information TND™ Tablet 85 User Manual • Rand McNally Website www.randmcnally.com/trucking • Support www.randmcnally.com/support • GPS accessories store.randmcnally.com • Facebook www.facebook.
Trademarks Rand McNally, the Rand McNally logo, the globe logo, and IntelliRoute are registered trademarks and TND is a trademark of RM Acquisition LLC, d/b/a Rand McNally. The Trucker’s Friend and National Truck Stop Directory are registered trademarks of TR Information Publishers. TruckDown is a registered trademark of TruckDown Info International, Inc. Wi-Fi is a registered trademark of the Wi-Fi Alliance. Weather data provided by FORECA. Fuel prices provided by OPIS.
