Users Manual

4 5
OverDryve
™
Pro II Quick Start GuideOverDryve
™
Pro II Quick Start Guide
Home
Volume
Down Up
Power
Your OverDryve
™
Pro IIInstall the Mount
NOTE: Follow all local laws and regulations governing the placement of the mount.
1. Select an area with a line of sight to the sky and GPS satellites.
2. Clean and dry the mounting area.
3. Remove the suction cup protective film.
4. Attach the two pieces of the mount together and lock into place.
5. Adjust the angle of the mount.
6. Pull the suction cup lever up to release suction.
7. Plug the power cord into the mount and the
vehicle’s 12-volt power source.
8. Place and hold the mount suction cup against the
mounting surface.
9. Press the suction cup lever down until it snaps
into place.
10. Snap the tablet onto the mount.
11. Adjust the tablet so that it can be easily seen
and does not block the driver's line of sight.
USB
AUX out
DC in
(power)
Micro HDMI
(video out)
Micro USB
(power)
Micro SD card
Reset
AUX out
OverDryve
™
Pro II
SiriusXM
®
smart mount
SiriusXM
Antenna