Users Manual

2 3
OverDryve
Pro II Quick Start GuideOverDryve
Pro II Quick Start Guide
Your OverDryve
Pro II Unit
Caution: Important Safety Information
Navigation
Use this device at your own risk.
Attend to this device only when it is safe to do so.
Traffic laws and regulations always have priority over any
instructions from the navigation system.
NOTE: If you do not understand the spoken instructions or are unsure
of what to do, refer to the navigation map on your device.
Installation
Make sure that the mount is securely mounted and properly
adjusted before each trip.
Make sure that the mount does not impair the driver’s visibility.
Do not attach the mount within the airbag deployment zone.
Install the mount in a manner that minimizes risk in the event of
an accident.
After installation, check all safety-related equipment to ensure that
it operates without interference from the device, its cables, or any
other accessories.
Connect the wall charger to a 120-volt or 240-volt outlet only.
Connect the vehicle charger to a 12-volt outlet only.
Device
Do not use sharp-edged objects on the device touch screen.
The device is not waterproof and is not protected against
water damage.
Protect the device from extreme temperatures. Operating
temperature for the device is between 32 degrees F and
120 degrees F.
Do not open the device casing.
Do not attempt to replace the battery. Contact Rand McNally
Customer Support with questions about the battery.
Always follow local regulations when disposing of this device.
NOTE: Make sure that there are no kinks in the cable and that it will
not be damaged by any sharp objects.
NOTE: Use only a moist cloth to clean the device.
NOTE: Do not pull the cable to unplug the unit.
Your OverDryve
Pro II
Box Contents
OverDryve
Pro II Unit
Smart mount with SiriusXM
®
Bracket with suction cup
Truck charger
USB cable and wall charger
Dash mount disc
FM transmitter antenna
AUX cable
Anti-glare screen protector
SiriusXM
®
magnetic mount antenna
Alcohol prep pad