Quick Start Guide

6
7
Getting Started with ClearDryve
™
To get started using ClearDryve
™
, first you need to charge the battery. After you power it on, then you
can pair ClearDryve
™
to your Bluetooth
®
- enabled phone, tablet or laptop. Once ClearDryve
™
is paired,
you can immediately start taking and managing calls or listening to music.
Charge the Battery
Before use, you need to charge the battery on ClearDryve
™
.
Connect the USB cable to the micro-USB port on ClearDryve
™
.
Connect the other end to a charger.
If the battery level is low when you power on ClearDryve
™
,
you will hear a “Battery low” notification.
Power ClearDryve
™
On and Off
To turn ClearDryve
™
on and off:
1. To power ClearDryve
™
on, press the MFB.
2. You will hear “Power on.”
3. To power ClearDryve
™
off, press and hold the MFB.
4. You will hear “Power off.”
When you power ClearDryve
™
on for the first time, it automatically enters pairing mode.
The next time you turn it on, it will automatically attempt to connect with the most
recently-paired device.
Pair with a Device over Bluetooth
®
When you power ClearDryve
™
on for the first time, it automatically enters pairing mode.
In pairing mode, the LED indicator blinks red and blue, and you will hear “Pairing.”