Product Overview

9. OPTIONAL ITEMS – Sold Separately
EasyProg
via Serial TTL connection
- version 2 or later
It is an accessory which has the main function of storing the of controller parameters. At any time you can
load new controller parameters and unload them on a production line (of the same controller), for example.
It is provided with three types of connections for loading or unloading the parameters:
- Serial RS-485: It is connected via RS-485 network to the
controller (only for those controllers provided with RS-485).
- USB: It is connected to the computer via USB port, using
the Sitrad Preset Editor.
- Serial TTL: The controller may be connected directly to
EasyProg
EASYPROG
IMPORTANT
I N O R D E R T O B E A B L E T O
COMMUNICATE WITH EASYPROG THIS
C O N T R O L L E R M U S T N O T
COMMUNICATE WITH SITRAD.
E-case
Recommended for the Evolution line, it prevents water from entering the back part of the instrument.
It protects the product when the installation site thereof is washed.
Electrical noise suppression filter
Wiring diagram of suppressors in
contactors
Suppressor
A1
A2
A1 and A2 are the
contactor coil terminals.
Wiring diagram of suppressors in
direct drive loads
Load
Suppressor
For direct drive take
into account the
maximum specified
current.
RC FILTER
Extension Frame
To install controllers with maximum dimensions of 76 x 34 x 77 mm (opening dimensions of 71 x 29 mm for
installation in the extended frame) in several situations, because it does not require precision of the
opening to embed the instrument. It allows customization through a sticker with the brand and company
contact, in addition to being accompanied by two 10 A (250 V AC) switches that can trigger internal light, air
curtain, on/off system or fan.
ENVIRONMENTAL INFORMATION
Packaging:
The materials used in the packaging of Full Gauge products are 100% recyclable. Try to
perform disposal through specialized recyclers.
Product:
The components used in Full Gauge controllers can be recycled and reused if
disassembled by specialized companies.
Disposal:
Do not incinerate or dispose the controllers that have reached the end of their service as
household garbage. Observe the laws in your area regarding disposal of electronic
waste. If in doubt, please contact Full Gauge Controls.
WARRANTY - FULL GAUGE CONTROLS
Products manufactured by Full Gauge Controls, as of May 2005, have a two (02) year
warranty, as of the date of the consigned sale, as stated on the invoice. They are guaranteed
against manufacturing defects that make them unsuitable or inadequate for their intended
use.
EXCEPTIONS TO WARRANTY
The Warranty does not cover expenses incurred for freight and/or insurance when sending
products with signs of defect or faulty functioning to an authorized provider of technical
support services. The following events are not covered either: natural wear and tear of parts;
external damage caused by falls or inadequate packaging of products.
LOSS OF WARRANTY
Products will automatically lose its warranty in the following cases:
- The instructions for assembly and use found in the technical description and installation
procedures in Standard IEC60364 are not obeyed;
- The product is submitted to conditions beyond the limits specified in its technical
description;
- The product is violated or repaired by any person not a member of the technical team of
Full Gauge Controls;
- Damage has been caused by a fall, blow and/or impact, infiltration of water, overload
and/or atmospheric discharge.
USE OF WARRANTY
To make use of the warranty, customers must send the properly packaged product to Full
Gauge Controls together with the invoice or receipt for the corresponding purchase. As much
information as possible in relation to the issue detected must be sent to facilitate analysis,
testing and execution of the service.
These procedures and any maintenance of the product may only be provided by Full
Gauge Controls Technical Support services in the company's headquarters at Rua Júlio de
Castilhos, 250 - CEP 92120-030 - Canoas - Rio Grande do Sul – Brasil
Copyright 2016
All rights reserved.
Rev. 03