Install Instructions

JlO
WALL MOUNTED DEHUMIDISTAT
INSTALLATION
INSTRUCTIONS
1 20
VOLT
1. Disconnect electrical
power.
2. Determine
dehumidistat location. This
con-
trol
should be
mounted
on an
inside
wall
where
normalaircirculation
can surround the
control.
For most residential
applications,
lo-
cate
the control adjacent to the existing wall
thermostat
for
easy
installation
and wiring.
3.
Remove
cover from
back
plate.
4. Connect
flying
leads f
rom back
of base
plate
to the
power
supply with approved wire
con-
nectors.
5.
Mount
back
plate
securely to wall
box
with
screws
provided
in the
parts package.
Note: Make sure the back
plate
is flat with-
out
any undue
stress.
Note: All wiring should conform
to
recom-
mendations
and any local
codes.
6.
Re-install front cover and secure with
cover
screw
supplied in
pafis pack.
OPERATIONAL
TEST
Turn the dehumidistat down
to its lowest
then
to the
highest setting.
Cycle
at least
3 times to
assure
proper
system function. Retum
control
knob
pointer
to desired setting.
DEHUMIDISTAT
P/N
s05549.1/JAN.
',99