Specifications
51
11. STOPPING THE MACHINE
A - Temporary stop
L Carry out cleaning and maintenance operations.
L Wind up the cable and fasten it to the machine 
with sticky tape.
L Cover the machine and place it in a dry room.  Do 
not leave it exposed to atmospheric agents and 
do not allow it to be touched by children or unift 
persons.
To disconnect from the main power supply, consult 
qualified personnel.
B - Definitive stop
L Besides carrying out the operations necessary for 
a temporary stop, cut off the cable, pack the ma-
chine in cardboard, polystyrene or other packing 
material and consign it to firms authorized for its 
disposal or to second-hand goods dealers.
12. PROBLEMS AND REMEDIES
Check  operations  to  be  carried  out  by  the 
user with the plug disconnected.
For any type of problem or inconvenience 
not specifically indicated, disconnect the 
plug and contact our service centre without 
attempting any direct repairs.
A) The machine does not start:
-  check that the plug is connected;
-  In case of power failure wait for the power to return 
and check if the earth leakage protection circuit 
breaker or the main switch is on;
-  check  the  condition  of  the  plug  and  the  supply 
cable; if damaged have them replaced by qualified 
personnel.
B) There is water under the machine:
-  check that the drainage tray is not obstructed.
C) Slow dispensing:
-  check  that  the  filters  and  delivery  heads  are 
clean;
-  check that the coffee is not too finely ground.
D) Irregular steam delivery:
-  check that the nozzles are not obstructed.
10.3.2. Regeneration
Softener DP2 - DP4
Regenerate the water softener within the time-limi-
ts specified for the softener as follows:
DP2
nr.1 regeneration per month for 500 coffees/day;
nr.2 regenerations per month (once a fortnight) for 
1000 coffees/day.
DP4
nr.1  regeneration per month for 1000 coffees/day;
nr.2  regenerations per month (once a fortnight) for 
   2000 coffees/day.
This table has been drawn up according to a water har-
dness of 25 degress calculated on the French scale.
See the documentation included with the softener 
for the instructions for use.










