Specification Sheet

.7.6
ALSO AVAILABLE AS A
PERFORMANCE STRUT
see page 8
1.97-in. (50mm) Body Diameter
Monotube design with high pressure nitrogen gas charge
Off-road Fluon banded piston
Brushed & Zinc plated with clear coated finish
Application-specific deflective disc valving
46mm Bore monotube construction
14mm Hardened steel rod
Black natural rubber bushings
Protective boot included
Limited Lifetime Warranty and 90-Day Free-Ride Offer
**
FEATURES BENEFITS
Delivers both performance and appearance
Quicker damping response time
Provides a consistent seal between piston and pressure tube
Premium long lasting finish
Automatically senses & responds to any suspension input
Ideal for larger light trucks, SUVs and more
Adds strength and durability
Enhance durability and reduced road harshness
Added protection for the shock rod and oil seal
Consumer protection
RS7000
®
MT SHOCK ABSORBER
HIGH CONTROL SHOCK - REDUCES ROLL AND SWAY
Rancho® RS7000®MT Monotube Steering Stabilizers enhance a vehicle’s performance, and are ideal for off roading, towing and street
applications. Utilizing Monotube Technology, Rancho Steering Stabilizers help reduce wheel shimmy, bump steer, and vibration while
tightening up steering performance by damping the tie rod to the axle. The Shock was engineered for Jeeps and trucks running over-
sized tires and wheels. RS7000MT Steering Stabilizers, built from the foundation of the Rancho RS7000 Series Shock, can help reduce
on- and off-road driver fatigue. The series is covered by a Limited Lifetime Warranty**.
Specifically engineered for high center of gravity light trucks and SUV’s to provide the handling, control and performance expected from
Rancho® RS7000®MT Shock Absorbers. These Shocks provide enhanced stability over stock twin tubes by reducing body roll in
evasive maneuvers and tight turns. These Shocks feature a high-pressure gas charge that separates the unit’s internal oil and
Nitrogen to provide additional spring rate. This helps to maximize damping response that dissipates heat for better control.
To further enhance ride control characteristics, Rancho RS7000MT Monotube Shocks include a hydraulic lockout
to cushion the impact as the vehicle suspension is fully extended. The series is covered by a Limited
Lifetime Warranty and 90-Day Free-Ride Offer**.
MONOTUBE DESIGN
RS7000
®
MT STEERING STABILIZER
MONOTUBE DESIGN
**
1.97-in. (50mm) Body Diameter
Monotube design with high pressure nitrogen gas charge
Off-road Fluon banded piston
Brushed & Zinc plated with clear coated finish
Ten-stage velocity sensitive valving
46mm Bore monotube construction
14mm Hardened steel rod
Black natural rubber bushings
Protective boot included
Reduces wheel shimmy, bump steer and vibration
Reduces on-or-off road fatigue
Limited Lifetime Warranty
FEATURES BENEFITS
Delivers both performance and appearance
Quicker damping response time
Provides a consistent seal between piston and pressure tube
Premium long lasting finish
Provides tuning specific for each vehicle
Ideal for larger light trucks, SUVs and more
Adds strength and durability
Enhance durability and reduced road harshness
Added protection for the shock rod and oil seal
Provides better drivability
Consumer safety
Consumer protection
**For more information visit gorancho.com
DUAL APPLICATIONS AVAILABLE
For vehicles with 35-in. or larger tires
DUAL STABILIZER BRACKET KIT
PART No. RS64101