Installation and Operation Manual

Page 14 WES
3
Installation and Operations Manual V1.4 Ramtech Electronics Limited 2018
Advanced
One or more Emergency Control Units can be added to a basic system
to provide additional system monitoring information. Emergency
Control Units can display details about which units have raised alarms,
any units with current fault warnings, and historical event logs. The
Emergency Control Unit also allows an authorised user to cancel active
medical alerts, and silence a re alarm using the access code.
To conserve battery power, the LCD display and backlight turn off after
a short period of inactivity. Pressing any of the navigation buttons will
activate the display. If there are no current warnings or re alarms
across the system, the emergency control unit will display the home
screen which shows the site name and the date and time.
Pressing enter ( ) goes to the main menu to allow settings to be
changed or logs to be viewed.
DEFAULT SITE
23/06/17 2 2 : 0 3
02 Minute Delay On
Prealarm mode - On
Emergency Control Unit Operation
Menu overview
Main Menu
System Logs
Settings
Settings Menu*
Unit Numbering
System Test
System Poll
Date and Time
Change Access Code
Backlight
Mobile Base
Change Language
System Log Menu
Alarms
Cancelled in Delay
System Tests
Medical Assist
External Tampers
Internal Tampers
DT Head Tampers
Low Signals
Low Batteries
Flat Batteries
Latched Units
Unit Removed
Unit Missing
Unexpected Unit
Clear All Logs*
Change Language
English
Deutsche
Français
Español
Italiano
Svenska
* Acces Code Required