Full Product Manual

Special installation 2: flat roof top

Explanations:

1.This installation is workable for flat roof top.

2.The wall or ground of rooftop should be concrete or

solid wall.

3.The installations could be both used expansion bolt

to fix the supporting structure.

Dimension requirement:

①

Distance from rotor centre to roof top ≥ 6 m

②

Supporting point should be 1.0 times of the

rotor diameter

③

Distance from blade tip to pole ≥250 mm

④

Φ114mm≤Outer diameter ≤Φ150 mm

⑤

Angle steel or guyed fastening structure