Full Product Manual

12
2. Wind Turbine Assembly
Installation on site is simple, mainly including mounting blades on the hub, securing the hub to the turbine body, installing the nosecone on the blade
hub and mounting wind turbine on the pole.
Please install the whole turbine in accordance with the following instructions.
2.1 Mounting Blades on The Hub
①Check if all components are in good condition. ②The hub, washer, bolt and nut ③The blades.
④Pass the hex bolts through from the ⑤Place blade, flat washer and locknut, ⑥ Assembled.
back side of the hub. and tighten the nut to 30N.m