Use and Care Manual

Maintenance Method
4
(5). Close air inlet grille (Refer to the 1st step)
Maintenance Method
Fig.3 Fig.4
2.2 Clean air inlet grille
(1). Open air inlet grille (the same with the 1st step of Clean Air Filter)
(2). Take out air lter (the same with the 2nd step of Clean Air Filter)
(3). Take out air inlet grille
Open air inlet grille for an angle of 45°, as shown in g.4, rise it.
(4). Clean
Clean it by pubescence brush, water and neutral cleaning, then throw water or dry it.
Note
！
Do not use water above 113°F (45°C) to wash the panel to prevent fade or deformation.
(5). Install air inlet grille (refer to 3rd step)
(6). Install air lter (refer to the 4th step of Clean Air Filter)
(7). Close air inlet grille (refer to the 1st step)
2.3 Install and change of air purier
(1). Open air inlet grille (the same the 1st step of Clean Air Filter)
(2). Disassembly purier
As shown in g.5, disassembly air lter, screw out xing bolts xed on purier on lter, then
purier could be disassembly.
(3). Take out the package sack of static ber net lter, then install the lter in stand of purier,
and x purier on air lter.
(4). Install air lter (the same with the 4th step of Clean Air Filter)
Fix bolt of
purifier
Stand for purifier
Purifier filter
Air filter
Fig.5