Instruction manual

MR6 • 7
MR6 PARTS LIST Note the extra chip components included.
RESISTORS
❒ 4 1K ohm chip resistors (R2,3,4)
❒ 3 10K ohm chip resistors (R1,7)
❒ 7 100K ohm chip resistor (R5,6,8,9,10)
CAPACITORS
❒ 7 5 pF chip capacitors (C7,8,9,11)
❒ 2 22 pF chip capacitor (C12)
❒ 3 100 pF chip capacitor (C3,4)
❒ 3 .001 uF chip capacitor (C2,10)
❒ 3 .1 uF chip capacitor (C5,6)
❒ 1 10 uF electrolytic chip capacitor (C1)
SEMICONDUCTORS
❒ 3 MMBTH10L chip NPN transistors [marked 3E] (Q3,4)
❒ 4 MMBTA20L chip NPN transistors [marked 1C] (Q1,2,5)
❒ 2 MMBV2109 chip varactor diode [marked 4J] (D1)
INDUCTORS
❒ 1 .10 uH chip inductor [marked R10 or 101K - in tiny letters!] (L2)
❒ 1 .15 uH chip inductor [marked 151K - in tiny letters!] (L1)
MISCELLANEOUS PARTS AND HARDWARE
❒ 1 MR6 printed circuit board
❒ 1 3 Volt Lithium camera battery
❒ 1 Battery holder (BH1)
❒ 1 Crystal, 12, 16 or 24 MHz (Y1)
❒ 18 inches insulated wire for antenna lead