Instruction manual

FMLP1 • 9
PARTS SUPPLIED WITH FMLP1 TRANSMITTER KIT
Capacitors
-(50% more SMT capacitors are supplied with each kit)
 4 10 pF chip capacitors (should be marked A1) [C1,2,9,10]
 2 12 pF chip capacitors (should be marked C1) [C3,8]
 4 27 pF chip capacitors (should be marked L1) [C4,5,6,7]
Inductors
 1 15” of #20 AWG enameled wire [used to make L1,2,3]
Hardware, Misc.
 1 10” long RG-188A Teflon coaxial cable
 2 ‘F’ style panel mount connectors
 2 0.375” GND solder lugs
 2 Brass GND shields
 1 1/4’-20 x 3/4” or longer bolt (used to wind coils)
Case Parts
 2 1+1/2” diameter PVC end caps
 1 3” long 1+1/2: diameter PVC pipe